415F2 Backhoe Loaders Hydraulic and Steering System Service Brake Control Caterpillar


Service Brake Control
`
415F2 Backhoe Loaders Hydraulic and Steering System [UENR6826]
BRAKING SYSTEM
BRAKE GP
415F2 Backhoe Loaders Hydraulic and Steering System Service Brake Control


Illustration 1g06002155

Table 1
Specification for 460-5743 Service Brake Control Gp 
Item  Qty  Part  Specification Description 
6V-7357 Bolt  Before assembly, apply blue Loctite 243 to the threads. 
206-1767 Spring  Free length is 38.7 ± 2.0 mm (1.52 ± 0.08 inch)
206-1768 Spring  Free length is 38.7 ± 2.0 mm (1.52 ± 0.08 inch)
165-6595 Pin As  Diameter is 19.950 ± 0.010 mm (0.7854 ± 0.0004 inch)
148-8325 Connector As  Torque to 35 ± 3 N·m (25 ± 2 lb ft)
148-8378 Elbow As  Torque to 25 ± 2 N·m (221 ± 18 lb in)
170-0967 Elbow As  Torque to 55 ± 6 N·m (41 ± 4 lb ft)
148-8325 Connector As  Torque to 26 to 29 N·m (230 to 256 lb in)

Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mounting Bracket - Control
Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
538, 548 and 558 Forest Machine Connector Contact Description
An Improved Window Position Switch is Now Used on Certain Excavators {7310}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Standard
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Soilmec
C9 Engines for Caterpillar Built Machines Crankshaft Seals
307E2 Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor) - Motor
An Improved Power Converter is Available for Certain Excavators {7338}
Installation of the <NOBR>255-2082</NOBR> Pilot Lines Gp on Certain Hydraulic Excavators {5057, 5059}
Installation Master Guide for the <NOBR>503-4975</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {5051}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Alternator - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Conveyor System
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)