PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Cylinder Caterpillar


Steering Cylinder
`


Illustration 1g06026800

Table 1
Specification for 383-4179 Steering Cylinder Gp 
Item  Qty  Part  Specification Description 
Bore of cylinder is 120 mm (4.7 inch)
Diameter of rod is 50 mm (2.0 inch)
Length of cylinder extended 1283 mm (50.5 inch)
Length of cylinder retracted 851.5 mm (33.52 inch)
Stroke of cylinder is 431.5 mm (16.99 inch)

Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor)
New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620}
415F2 Backhoe Loaders Hydraulic and Steering System Service Brake Control
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mounting Bracket - Control
Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
538, 548 and 558 Forest Machine Connector Contact Description
An Improved Window Position Switch is Now Used on Certain Excavators {7310}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Standard
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor) - Motor
An Improved Power Converter is Available for Certain Excavators {7338}
Installation of the <NOBR>255-2082</NOBR> Pilot Lines Gp on Certain Hydraulic Excavators {5057, 5059}
Installation Master Guide for the <NOBR>503-4975</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {5051}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Alternator - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Conveyor System
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
301.7D CR Mini Hydraulic Excavator Track Adjustment - Inspect
336D 2L and 340D 2L Excavators Machine Systems Swing Gear and Bearing - Remove and Install