PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Conveyor System Caterpillar


Conveyor System
`


Illustration 1g06182352
Right side view

Table 1
Specification for 500-1312 Conveyor Gp 
Item  Qty  Part  Specification Description 
18  8T-0389 Locknut  Torque to 7.5 ± 2.0 N·m (66.4 ± 17.7 lb in)
287-2499 Nut  Torque to 55 ± 10 N·m (41 ± 7 lb ft)
16  8T-4132 Nut  Torque to 200 ± 30 N·m (148 ± 22 lb ft)
16  385-8533 Bushing  Tighten the bolts to 41 to 45 N·m (30 to 33 lb ft)
Conveyor Head Pulley Bearing Set Screws  Before assembly, apply Loctite 243 to the threads of set screws.
Tighten the set screws to 16.5 ± 2.0 N·m (146.0 ± 17.7 lb in)

Information System:

C2.4 Tier 4 Final Engines for Caterpillar Built Machines Alternator - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Installation Master Guide for the <NOBR>503-4975</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {5051}
Installation of the <NOBR>255-2082</NOBR> Pilot Lines Gp on Certain Hydraulic Excavators {5057, 5059}
An Improved Power Converter is Available for Certain Excavators {7338}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor) - Motor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor)
New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620}
415F2 Backhoe Loaders Hydraulic and Steering System Service Brake Control
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mounting Bracket - Control
Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
301.7D CR Mini Hydraulic Excavator Track Adjustment - Inspect
336D 2L and 340D 2L Excavators Machine Systems Swing Gear and Bearing - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heating and Air Conditioning Unit - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heater Core - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Evaporator Coil - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Cab - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Fuel Tank - Remove and Install
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}