PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting Caterpillar


Control Valve and Mounting
`
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems [UENR6293]
BRAKING SYSTEM
VALVE GP
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting


Illustration 1g06357803


Illustration 2g06357817
View of area A

Table 1
Item  Qty  Part Number  Specification Description 
5C-9553 Bolt  Torque to 6 ± 1 N·m (53 ± 9 lb in)
7X-2537 Bolt  Torque to 15 ± 3 N·m (133 ± 27 lb in)
6V-8187 Nut  Torque to 6 ± 1 N·m (53 ± 9 lb in)


Illustration 3g06357834
View of area B

Table 2
Item  Qty  Part Number  Specification Description 
6V-0253 Insert  Final Installation torque is 6 ± 1 N·m (53 ± 9 lb in)
9S-1354 Nut  Final Installation torque is 27.0 ± 3.0 N·m (239.0 ± 26.6 lb in)
During final assembly, apply Locatite 243 on handle screw. 
454-9943 Nut  Torque to 27.0 ± 3.0 N·m (239.0 ± 26.6 lb in)

Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Conveyor System
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Alternator - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Installation Master Guide for the <NOBR>503-4975</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {5051}
Installation of the <NOBR>255-2082</NOBR> Pilot Lines Gp on Certain Hydraulic Excavators {5057, 5059}
An Improved Power Converter is Available for Certain Excavators {7338}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor) - Motor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor)
New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620}
301.7D CR Mini Hydraulic Excavator Track Adjustment - Inspect
336D 2L and 340D 2L Excavators Machine Systems Swing Gear and Bearing - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heating and Air Conditioning Unit - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Heater Core - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Evaporator Coil - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Cab - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Fuel Tank - Remove and Install
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}
352F Mobile Hydraulic Power Unit (MHPU) Machine System Main Hydraulic System
336D 2L and 340D 2L Excavators Machine Systems Hydraulic Lockout Control - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Window Wiper Motor - Remove and Install - Lower