314F and 315F Excavators Machine System Specifications Pilot Lines (Main Pump) Caterpillar


Pilot Lines (Main Pump)
`


Illustration 1g06029124
Right side view

Table 1
Specification for 359-8546 Pilot Lines Gp 
Item  Qty  Part  Specification Description 
148-8347 Elbow As  Torque to 68.6 ± 7 N·m (50.6 ± 5 lb ft)
150-4037 Tee As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
255-1930 Hose As  Torque to 160 ± 16 N·m (118 ± 11 lb ft)
136-0207 Cable Strap  Sharp corners at the cutting edge of each cable strap shall not be allowed. 
7K-1181 Cable Strap  Sharp corners at the cutting edge of each cable strap shall not be allowed. 
383-7712 Hose As  Torque to 160 ± 16 N·m (118 ± 11 lb ft)
115-8848 Hose As  Torque to 76 ± 4 N·m (56 ± 3 lb ft)
148-8354 Elbow As  Torque to 32.4 ± 3.0 N·m (286.8 ± 26.6 lb in)

Information System:

GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Disassemble
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
DFS118, DFS121 and DFS124 Silage Defacers Safety Messages
Installation of the <NOBR>487-5000</NOBR> Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057}
924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders Machine System Pilot Pressure - Check
307 Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
349F and 352F Excavators Monitoring System - Monitor with Installed Cat Grade With Assist
314F and 315F Excavators Machine System Specifications Chassis Lighting
An Improved Main Control Valve is Now Used on 308E2 CR and 308E2 SR Mini Hydraulic Excavators {5051}
314F and 315F Excavators Machine System Specifications Control Valve (Auxiliary)
349F and 352F Excavators Joystick Controls - Cat Grade With Assist System
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
314F and 315F Excavators Machine System Specifications Swing Motor
314F and 315F Excavators Machine System Specifications Heater and Air Conditioner Mounting
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Rotator - Remove and Install
314F and 315F Excavators Machine System Specifications Pump Lines
314F and 315F Excavators Machine System Specifications Hydraulic Tank and Filter
314F and 315F Excavators Machine System Specifications Control Lines
314F and 315F Excavators Machine System Specifications Stick - 3.00 m (9.843 ft)
725C2 Articulated Truck Aftercooler Core - Inspect/Clean
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Design
725C2 Articulated Truck Diesel Exhaust Fluid - Fill - Emission Related Component
314F and 315F Excavators Machine System Specifications Stick Cylinder Lines
314F and 315F Excavators Machine System Specifications Main Control Valve