EPC Parts Catalogs

314F and 315F Excavators Machine System Specifications Swing Motor Caterpillar


  1. Home
  2. Specifications
  3. #114846
Swing Motor
`
314F and 315F Excavators Machine System Specifications [UENR5657]
314F and 315F Excavators Machine System Specifications Pilot Lines (Main Pump)
314F and 315F Excavators Machine System Specifications Heater and Air Conditioner Mounting
HYDRAULIC SYSTEM
MOTOR GP
316E Excavator Machine System Specifications Relief Valve (Crossover)
312D2 and 313D2 Excavators Machine System Specifications Travel Motor
312D2 and 313D2 Excavators Machine System Specifications Travel Counterbalance Valve
314F and 315F Excavators Machine System Specifications Swing Motor
Show/hide table
Illustration 1g06029131

Show/hide table
Table 1
Specification for 422-9184 Swing Motor Gp, and 422-9185 Piston Motor Gp 
Item  Qty  Part  Specification Description 
1  Thickness of two new friction plates and two new separator plates is 6.8 mm (0.27 inch). 
2 446-7241 Friction Plate  Thickness of one new friction plate is 2.0 mm (0.08 inch) 
2 446-7239 Separator Plate  Thickness of one new separator plate is 1.4 mm (0.06 inch). 
2  2  371-7201 Plug  Torque to 18.0 ± 2.7 N·m (159.3 ± 23.9 lb in). 
3  2  446-7230 Plug  Torque to 36.0 ± 5.4 N·m (26.6 ± 4.0 lb ft). 
4  18  126-2055 Spring  Free length is 37.5 mm (1.48 inch). 
5  3  184-1836 Bolt  Torque to 333 ± 50 N·m (246 ± 37 lb ft). 
6  4  446-7227 Plug  Torque to 185.0 ± 27.8 N·m (136.4 ± 20.5 lb ft). 
7  2  446-7229 Spring  Free length is 49.00 mm (1.929 inch). 
8  2  446-7226 Relief Valve Gp  Torque to 177.0 ± 26.6 N·m (130.5 ± 19.6 lb ft). 

Information System:

314F and 315F Excavators Machine System Specifications Pilot Lines (Main Pump)
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Disassemble
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
DFS118, DFS121 and DFS124 Silage Defacers Safety Messages
Installation of the <NOBR>487-5000</NOBR> Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057}
924K, 926M, 930K, 930M, 938K, and 938M Wheel Loaders Machine System Pilot Pressure - Check
307 Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
349F and 352F Excavators Monitoring System - Monitor with Installed Cat Grade With Assist
314F and 315F Excavators Machine System Specifications Chassis Lighting
An Improved Main Control Valve is Now Used on 308E2 CR and 308E2 SR Mini Hydraulic Excavators {5051}
314F and 315F Excavators Machine System Specifications Control Valve (Auxiliary)
349F and 352F Excavators Joystick Controls - Cat Grade With Assist System
314F and 315F Excavators Machine System Specifications Heater and Air Conditioner Mounting
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Rotator - Remove and Install
314F and 315F Excavators Machine System Specifications Pump Lines
314F and 315F Excavators Machine System Specifications Hydraulic Tank and Filter
314F and 315F Excavators Machine System Specifications Control Lines
314F and 315F Excavators Machine System Specifications Stick - 3.00 m (9.843 ft)
725C2 Articulated Truck Aftercooler Core - Inspect/Clean
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Design
725C2 Articulated Truck Diesel Exhaust Fluid - Fill - Emission Related Component
314F and 315F Excavators Machine System Specifications Stick Cylinder Lines
314F and 315F Excavators Machine System Specifications Main Control Valve
314F and 315F Excavators Machine System Specifications Stick Cylinder Lines