Stick Cylinder Lines
`
314F and 315F Excavators Machine System Specifications
[UENR5657]
314F and 315F Excavators Machine System Specifications
Stick - 3.00 m (9.843 ft)
314F and 315F Excavators Machine System Specifications
Main Control Valve
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
314D CR Excavator Machine System Specifications
Bucket Cylinder Lines
312D2 and 313D2 Excavators Machine System Specifications
Bucket Cylinder Lines
312D2 and 313D2 Excavators Machine System Specifications
Stick Cylinder Lines
314E Excavator Machine System Specifications
Stick Cylinder Lines
314E Excavator Machine System Specifications
Pilot Lines
314E Excavator Machine System Specifications
Hydraulic Filter and Lines Gp
314E Excavator Machine System Specifications
Pilot Lines - Main Control Valve
Show/hide table
![]() | |
Illustration 1 | g06029614 |
Show/hide table
Specification for 399-2565 Cylinder Lines Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 399-2570 Tube As | Torque to |
C | - | - | Distance from the center of the mounting pin to the support assemblies is |
D | - | - | Distance from the center of the mounting pin to the support assemblies is |
2 | 2 | 8T-4910 Bolt | Torque to |
3 | 8 | 8T-4196 Bolt | Torque to |
4 | 2 | 8T-4186 Bolt | Torque to |
E | - | - | Orient the support assemblies to the angle of 30.8 degrees. |
F | - | - | Orient the support assemblies to the angle of 30 ± 3 degrees. |
Information System:
725C2 Articulated Truck
Diesel Exhaust Fluid - Fill - Emission Related Component
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Engine Design
725C2 Articulated Truck
Aftercooler Core - Inspect/Clean
314F and 315F Excavators Machine System Specifications
Stick - 3.00 m (9.843 ft)
314F and 315F Excavators Machine System Specifications
Control Lines
314F and 315F Excavators Machine System Specifications
Hydraulic Tank and Filter
314F and 315F Excavators Machine System Specifications
Pump Lines
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Hydraulic Rotator - Remove and Install
314F and 315F Excavators Machine System Specifications
Heater and Air Conditioner Mounting
314F and 315F Excavators Machine System Specifications
Swing Motor
314F and 315F Excavators Machine System Specifications
Pilot Lines (Main Pump)
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Rotator Motor and Manifold - Disassemble
314F and 315F Excavators Machine System Specifications
Main Control Valve
314F and 315F Excavators Machine System Specifications
Stick Cylinder Lines
314F and 315F Excavators Machine System Specifications
Pump Lines
336D 2L and 340D 2L Excavators Machine Systems
Bucket - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Shell Assembly - Remove and Install
314F and 315F Excavators Machine System Specifications
Boom Cylinder
316F Excavator Machine System Specifications
Bucket Cylinder
314F and 315F Excavators Machine System Specifications
Front Lines
336D 2L and 340D 2L Excavators Machine Systems
Bucket Linkage - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Hydraulic Cylinder - Remove and Install
314F and 315F Excavators Machine System Specifications
Front Lines
336D 2L and 340D 2L Excavators Machine Systems
Bucket Linkage Bearings and Seals - Remove and Install