314F and 315F Excavators Machine System Specifications Stick Cylinder Lines Caterpillar


Stick Cylinder Lines
`


Illustration 1g06029627

Table 1
Specification for 393-5877 Stick Cylinder Lines Gp 
Item  Qty  Part  Specification Description 
394-6633 Tube As  Torque to 160 ± 16 N·m (118 ± 12 lb ft)
8T-4186 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in)
Distance from the center of the mounting pin to the center of the support assembly is 335 ± 3 mm (13.2 ± 0.1 inch)
Distance from the center of the mounting pin to the center of the support assembly is 936 ± 3 mm (36.9 ± 0.1 inch)
8T-4196 Bolt  Torque to 32 ± 6 N·m (283 ± 53 lb in)
8T-4910 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
Orient the support assemblies to an angle of 30 ± 3 degrees. 
8T-4185 Bolt  Torque to 55 ± 10 N·m (41 ± 7 lb ft)

Information System:

314F and 315F Excavators Machine System Specifications Main Control Valve
314F and 315F Excavators Machine System Specifications Stick Cylinder Lines
725C2 Articulated Truck Diesel Exhaust Fluid - Fill - Emission Related Component
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Design
725C2 Articulated Truck Aftercooler Core - Inspect/Clean
314F and 315F Excavators Machine System Specifications Stick - 3.00 m (9.843 ft)
314F and 315F Excavators Machine System Specifications Control Lines
314F and 315F Excavators Machine System Specifications Hydraulic Tank and Filter
314F and 315F Excavators Machine System Specifications Pump Lines
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Rotator - Remove and Install
314F and 315F Excavators Machine System Specifications Heater and Air Conditioner Mounting
314F and 315F Excavators Machine System Specifications Swing Motor
314F and 315F Excavators Machine System Specifications Pump Lines
336D 2L and 340D 2L Excavators Machine Systems Bucket - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Shell Assembly - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Cylinder
316F Excavator Machine System Specifications Bucket Cylinder
314F and 315F Excavators Machine System Specifications Front Lines
336D 2L and 340D 2L Excavators Machine Systems Bucket Linkage - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Cylinder - Remove and Install
314F and 315F Excavators Machine System Specifications Front Lines
336D 2L and 340D 2L Excavators Machine Systems Bucket Linkage Bearings and Seals - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Stick - Remove and Install
349D2 MHPU Mobile Hydraulic Power Unit (OEM) Maintenance Interval Schedule