314F and 315F Excavators Machine System Specifications Pilot Lines Caterpillar


Pilot Lines
`


Illustration 1g06030128

Table 1
Specification for 466-1956 Pilot Lines Gp 
Item  Qty  Part  Specification Description 
148-8435 Tee As  Torque to 24 ± 3 N·m (212 ± 27 lb in)


Illustration 2g06030129

Table 2
Item  Qty  Part  Specification Description 
338-6970 Pressure Sensor Gp  Before assembly, apply thin hydraulic oil to outside diameter of male thread sensor.
Torque to 64 ± 3 N·m (47 ± 2 lb ft)
7K-1181 Cable Strap  Sharp corners at the cutting edge of each cable strap shall not be allowed. 

Information System:

Buttons are Now Used When Installing Bonded Glass {7301}
Four-point Seat Belts are Now Available for Certain Excavators and Track Feller Bunchers {7312}
374F Excavator Machine Systems Main Hydraulic Pump - Assemble
374F Excavator Machine Systems Main Hydraulic Pump - Disassemble
349D2 MHPU Mobile Hydraulic Power Unit (OEM) Maintenance Interval Schedule
336D 2L and 340D 2L Excavators Machine Systems Stick - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Bucket Linkage Bearings and Seals - Remove and Install
314F and 315F Excavators Machine System Specifications Front Lines
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Hydraulic Cylinder - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Bucket Linkage - Remove and Install
314F and 315F Excavators Machine System Specifications Front Lines
316F Excavator Machine System Specifications Bucket Cylinder
314F and 315F Excavators Machine System Specifications Pilot Valve
314F and 315F Excavators Machine System Specifications Pilot Valve
Electric Starting Motor on Certain C7.1 Machine Engines {1453}
314F and 315F Excavators Machine System Specifications Pilot Lines
336D 2L and 340D 2L Excavators Machine Systems Stick Bearings and Seals - Remove and Install
Installation of the <NOBR>504-7558</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 6129}
Installation Procedure for the <NOBR>376-6329</NOBR> Front Lines Gp on Certain Hydraulic Excavators {5057}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
Installation Procedure for the <NOBR>494-6809</NOBR> Chassis Wiring Gp On Certain Hydraulic Excavators {1408, 6129}
Installation Procedure for the <NOBR>494-6811</NOBR> Cab Wiring Gp On Certain Hydraulic Excavators {1408, 7301}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Head
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Camshaft