314F and 315F Excavators Machine System Specifications Boom Cylinder Lines Caterpillar


Boom Cylinder Lines
`


Illustration 1g03507276

Table 1
Specification for 385-2848 Boom Cylinder Lines Gp and 385-2849 Boom Cylinder Lines Gp 
Item  Qty  Part  Specification Description 
Distance from the center line of the mounting pin to the center of the support assembly is 487.0 mm (19.17 inch)
8T-0271 Bolt  Torque to 51.2 ± 9.6 N·m (37.8 ± 7.1 lb ft)
6V-5842 Bolt  Torque to 31.5 ± 5.9 N·m (278.8 ± 52.2 lb in)
Orient the support assemblies to an angle of 30 degrees. 
269-5224 Bolt  Torque to 62.6 ± 11.7 N·m (46.2 ± 8.6 lb ft)

Information System:

314F and 315F Excavators Machine System Specifications Swing Drive
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Boom - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Bushings (Grapple) - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Lines
314F and 315F Excavators Machine System Specifications Pilot Valve
325F Excavator Machine Systems Sprocket - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Engine Performance - Test - Engine Speed
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Glow Plugs
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Front)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Piston and Rings
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft
314F and 315F Excavators Machine System Specifications Fuel Tank
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Final Drive and Travel Motor - Remove and Install
314F and 315F Excavators Machine System Specifications Swing Drive Mounting
313D2 and 313D2 GC Excavator Machine Systems Specifications Track Roller Mounting
330F MHPU Mobile Hydraulic Power Unit Machine System Power Shift Pressure - Check
325F Excavator Machine Systems Counterbalance Valve (Travel) - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Gear Pump (Pilot) - Test
325F Excavator Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Specifications
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Swing Motor - Remove and Install