314F and 315F Excavators Machine System Specifications Boom Cylinder Lines Caterpillar


Boom Cylinder Lines
`


Illustration 1g06030751

Table 1
Specification for 393-4938 Boom Cylinder Lines Gp and 399-7503 Boom Cylinder Lines Gp 
Item  Qty  Part  Specification Description 
338-6971 Pressure Sensor Gp  Before assembly, apply thin hydraulic oil to outer diameter of male thread sensor. 
Torque to 64 ± 3 N·m (47 ± 2 lb ft).
Distance from the centerline of the mounting pin to the support assemblies (2) is 467.0 ± 3.0 mm (18.39 ± 0.12 inch)
8T-4196 Bolt  Torque to 32 ± 6 N·m (283 ± 53 lb in)
8T-4194 Bolt  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
396-5360 Tube As  Torque to 114.5 ± 17.0 N·m (84.4 ± 12.5 lb ft)
Orient the support assemblies to an angle of 30 degrees. 

Information System:

314F and 315F Excavators Machine System Specifications Fuel Tank
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
314F and 315F Excavators Machine System Specifications Swing Drive
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Boom - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Bushings (Grapple) - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Lines
314F and 315F Excavators Machine System Specifications Pilot Valve
325F Excavator Machine Systems Sprocket - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Engine Performance - Test - Engine Speed
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Glow Plugs
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Front)
336D 2L and 340D 2L Excavators Machine Systems Final Drive and Travel Motor - Remove and Install
314F and 315F Excavators Machine System Specifications Swing Drive Mounting
313D2 and 313D2 GC Excavator Machine Systems Specifications Track Roller Mounting
330F MHPU Mobile Hydraulic Power Unit Machine System Power Shift Pressure - Check
325F Excavator Machine Systems Counterbalance Valve (Travel) - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Gear Pump (Pilot) - Test
325F Excavator Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Specifications
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Swing Motor - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
314F and 315F Excavators Machine System Specifications Manifold and Reducing Valve (Pilot Oil)