314F and 315F Excavators Machine System Specifications Swing Drive Mounting Caterpillar


Swing Drive Mounting
`


Illustration 1g06270054
Typical Example

Table 1
Specification for 441-2535 Swing Drive and Mounting Gp, and 441-2536 Swing Drive and Mounting Gp 
Item  Qty  Part  Specification Description 
191-2543 Pin  Before assembly, apply Loctite C5A Copper anti-seize compound to the pin. 
Before assembly, the surfaces must be clean and free of protective coating. 
14  461-3872 Bolt  Before assembly, remove compound, oil and dust from female threads, then apply Loctite C5A Copper anti-seize compound to the threads.
Use the following tightening procedure:

1. Tighten bolts to 90 ± 15 N·m (66 ± 11 lb ft).
2. Turn to an additional angle of 55± 5 degrees. 
Before assembly into the upper frame group, coat the mating surfaces with 8C-8422 Sealant. 

Information System:

336D 2L and 340D 2L Excavators Machine Systems Final Drive and Travel Motor - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
314F and 315F Excavators Machine System Specifications Fuel Tank
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
314F and 315F Excavators Machine System Specifications Swing Drive
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Boom - Remove and Install
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Bushings (Grapple) - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Lines
314F and 315F Excavators Machine System Specifications Pilot Valve
325F Excavator Machine Systems Sprocket - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Engine Performance - Test - Engine Speed
313D2 and 313D2 GC Excavator Machine Systems Specifications Track Roller Mounting
330F MHPU Mobile Hydraulic Power Unit Machine System Power Shift Pressure - Check
325F Excavator Machine Systems Counterbalance Valve (Travel) - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Gear Pump (Pilot) - Test
325F Excavator Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Specifications
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
336D 2L and 340D 2L Excavators Machine Systems Swing Motor - Remove and Install
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines
314F and 315F Excavators Machine System Specifications Manifold and Reducing Valve (Pilot Oil)
349F and 352F Excavators Engine Supplement Fan Drive - Remove and Install - Direct Drive - Type 2
314F and 315F Excavators Machine System Specifications Boom Cylinder Lines