725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Gear Motor (Hydraulic Fan) Caterpillar


Gear Motor (Hydraulic Fan)
`


Illustration 1g06496479


Illustration 2g06496481

Table 1
Item  Qty  Part  Specification Description 
Torque to 240 N·m (177 lb ft)
Torque to 70 N·m (52 lb ft)
Torque to 45 N·m (33 lb ft)
Torque to 15 N·m (133 lb in)
Torque to 140 N·m (103 lb ft)
Displacement per revolution is 22 cc (1 cubic inch)

Information System:

336D2/336D2 GC Excavator Engine Supplement Turbocharger - Remove and Install
Counterbalance Valves Are Now Used on Certain Hydraulic Excavator Forestry Grapples {5362, 5457, 5555, 6307}
538 Forest Machine Machine Systems Relief Valve (Crossover) - Test and Adjust
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Assemble - Rear Hydrostatic Piston Motor
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Disassemble - Rear Hydrostatic Piston Motor
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Assemble - Front Hydrostatic Piston Motor
926M, 930M and 938M Wheel Loaders Power Train Piston Motor (Hydrostatic) - Disassemble - Front Hydrostatic Piston Motor
Retrofitting Boom Lowering Control Valve/Stick Lowering Control Valve on 345D/349D/349D2 Excavators {5051, 5057, 5059, 5456, 5458}
336D 2L and 340D 2L Excavators Machine Systems Pressure Reducing Valve (Implement and Swing Priority) - Remove and Install
538 Forest Machine Machine Systems Travel Motor - Test - Measurement of Case Drain Oil
308E2 CR, 308E2 SR Mini Hydraulic Excavator Diagnostic Trouble Codes
336D 2L and 340D 2L Excavators Machine Systems Gear Pump (Pilot) - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Hydraulic Tank - Remove and Install
538 Forest Machine Machine Systems Process for Setting Up the Work Tool
325F Excavator Machine Systems Final Drive - Disassemble
325F Excavator Machine Systems Final Drive - Assemble
336D 2L and 340D 2L Excavators Machine Systems Pilot Valve (Joystick) - Remove and Install
303.5E2 CR Mini Hydraulic Excavator Machine ECM Diagnostic Trouble Codes
Installation Procedure for the Hydraulic Hand Control Gp (Universal) {5063}
303.5E2 CR Mini Hydraulic Excavator Machine ECM Event Codes
303.5E2 CR Mini Hydraulic Excavator Machine ECM General Information
M314F and M316F Wheeled Excavators Hydraulic System Main Pump (Minimum Displacement) - Test and Adjust - Test without Flow Meter
336D 2L and 340D 2L Excavators Machine Systems Pilot Valve (Travel) - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Main Hydraulic Pump - Remove and Install