725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake Caterpillar


Service Brake
`


Illustration 1g06035038

Table 1
Item  Qty  Part  Specification Description 
550-4716 Separator Plate  Thickness of one new separator plate is 8.08 ± 0.13 mm (0.318 ± 0.005 inch)
381-6725 Friction Disc  Thickness of one new friction disc is 5.41 ± 0.08 mm (0.213 ± 0.003 inch)
163-7233 D-Ring Seal  Before assembly, lubricate lightly with the lubricant that is being sealed. 
493-2622 Spring  Length under test force is 51.55 mm (2.030 inch).
Test force is 485 ± 24 N (109 ± 5 lb).
Free length after test is 57.61 mm (2.268 inch)
163-7234 D-Ring Seal  Before assembly, lubricate lightly with the lubricant that is being sealed. 

Information System:

336D 2L and 340D 2L Excavators Machine Systems Main Hydraulic Pump - Remove and Install
336D 2L and 340D 2L Excavators Machine Systems Pilot Valve (Travel) - Remove and Install
M314F and M316F Wheeled Excavators Hydraulic System Main Pump (Minimum Displacement) - Test and Adjust - Test without Flow Meter
303.5E2 CR Mini Hydraulic Excavator Machine ECM General Information
303.5E2 CR Mini Hydraulic Excavator Machine ECM Event Codes
Installation Procedure for the Hydraulic Hand Control Gp (Universal) {5063}
303.5E2 CR Mini Hydraulic Excavator Machine ECM Diagnostic Trouble Codes
336D 2L and 340D 2L Excavators Machine Systems Pilot Valve (Joystick) - Remove and Install
325F Excavator Machine Systems Final Drive - Assemble
325F Excavator Machine Systems Final Drive - Disassemble
538 Forest Machine Machine Systems Process for Setting Up the Work Tool
336D 2L and 340D 2L Excavators Machine Systems Hydraulic Tank - Remove and Install
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Service Brake
336D 2L and 340D 2L Excavators Machine Systems Control Manifold (Pilot Oil) - Remove and Install
DFS118, DFS121 and DFS124 Silage Defacers Lifting and Tying Down
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples Mounting Bracket - Remove and Install
415F2 Industrial Loader Machine Systems Pitch Cylinder (3-Point Hitch) - Remove and Install
415F2 Industrial Loader Machine Systems Lift Cylinder (3-Point Hitch) - Remove and Install
415F2 Industrial Loader Machine Systems Tilt Cylinder (3-Point Hitch) - Remove and Install
415F2 Industrial Loader Machine Systems 3-Point Hitch - Remove and Install
415F2 Industrial Loader Machine Systems Hitch Link (3-Point Hitch) - Remove and Install
415F2 Industrial Loader Machine Systems Pilot Valve (3-Point Hitch) - Remove and Install
415F2 Industrial Loader Machine Systems Bank Valve (3-Point Hitch) - Remove and Install
415F2 Industrial Loader Machine Systems Scarifier - Remove and Install