 | |
| Illustration 1 | g00819703 |
(1) Tighten the two bolts on the sight glass to the following torque. ... 7 ± 1 N·m (62 ± 9 lb in)
(2) 117-9152 Valve
- Vacuum relief cracking pressure ... 0 ± 2 kPa (0 ± 0.3 psi)
- Pressure relief cracking pressure ... 70 ± 20 kPa (10 ± 3 psi)
(3) Tighten the plug to the following torque. ... 150 ± 10 N·m (110 ± 7 lb ft)
Note: Apply 4C-9506 Retaining Compound to the threads of the plug before installation.
(4) 7B-3039 Spring
- Length under test force ... 26.2 mm (1.03 inch)
- Test force ... 15.55 ± 1.25 N (3.496 ± 0.281 lb)
- Free length ... 36.5 mm (1.44 inch)
- Outside diameter ... 19.8 mm (0.780 inch)
- Test force ... 15.55 ± 1.25 N (3.496 ± 0.281 lb)
(5) Tighten the plug to the following torque. ... 68 ± 7 N·m (50 ± 5 lb ft)
(6) Tighten the plug to the following torque. ... 75 ± 5 N·m (55 ± 4 lb ft)
Note: Apply 4C-9506 Retaining Compound to the threads of the plug before installation.
 | |
| Illustration 2 | g00819704 |
View of area B | |
(7) The ends of the seals must be intersected in order to complete the seal for the tank.
(8) Apply 4C-9506 Retaining Compound to the diameter of the seal for complete contact with the baffle.
(9) 9J-6379 Disc Spring
- Length under test force ... 2 mm (0.08 inch)
- Test force ... 270.5 ± 54.1 N (60 ± 12 lb)
- Free length ... 2.87 ± 0.20 mm (0.113 ± 0.008 inch)
- Outside diameter ... 125.00 mm (4.9213 inch)
- Test force ... 270.5 ± 54.1 N (60 ± 12 lb)
(10) Tighten six bolts to the following torque. ... 90 ± 15 N·m (65 ± 10 lb ft)
(11) 5M-7304 Spring
- Length under test force ... 78.5 mm (3.09 inch)
- Test force ... 928 ± 47 N (209 ± 10 lb)
- Free length ... 125.0 mm (4.921 inch)
- Outside diameter ... 43.7 mm (1.72 inch)
- Test force ... 928 ± 47 N (209 ± 10 lb)