Bucket Cylinder
`
325C Excavator Machine System Specifications
[RENR5363]
325C Excavator Machine System Specifications
Stick Cylinder
325C Excavator Machine System Specifications
Final Drive
HYDRAULIC SYSTEM
CYLINDER GP
325C Excavator Machine System Specifications
Stick Cylinder
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Bucket Cylinder
Show/hide table
 | |
| Illustration 1 | g03620177 |
Show/hide table
| Specification for 179-9793 Bucket Cylinder and Seal Gp , and 158-8999 Bucket Cylinder and Seal Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 3B-8489 Grease Fitting | Torque to 9.3 ± 4.9 N·m (82.3 ± 43.3 lb in). |
| 2 | 1 | 240-2915 Bushing | Before installation, bore is 80.20 ± 0.04 mm (3.157 ± 0.002 inch). Installation depth is 7.5 mm (0.30 inch). |
| 3 | 1 | 163-3748 Bushing | Before installation, bore is 80.12 ± 0.02 mm (3.154 ± 0.001 inch). Installation depth is 7.35 mm (0.290 inch). |
| B | 1 | 185-0197 Cylinder As | Bore is 130 mm (5.1 inch). |
| C | 1 | 185-0198 Rod As | Diameter is 90 mm (3.5 inch). |
| 4 | 12 | 4I-3628 Bolt | Torque to 367 ± 55 N·m (270 ± 40 lb ft). |
| 5 | 1 | 185-0195 Locknut | Torque to 9460 ± 470 N·m (6977 ± 346 lb ft). |
| 6 | 1 | 096-3216 Socket Setscrew | Torque to 57 ± 10 N·m (42 ± 7 lb ft). After tightening the socket setscrew, stake the socket setscrew in two places. |
Information System:
3408E and 3412E Industrial Engines
System Overview
325C Excavator Hydraulic System
Pump Control (Negative Flow) - Test
3176C and 3196 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Disassemble
446B Backhoe Loader Transmission (Autoshift)
Solenoid Valve (Autoshift)
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers
Transmission Oil - Change
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets {1124, 1201, 1203}
312C and 312C L Excavator
Belt - Inspect/Adjust/Replace
325C Excavator Machine System Specifications
Stick Cylinder
2001/12/03
Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
312C Excavator Machine Systems
Blade Pump - Remove and Install
5230B Excavator Machine Systems
Selector Valve (Hydraulic Activation) - Install
3046 Engine for Caterpillar Built Machines
Fuel Injection Timing - Check - In-line Fuel Pump
312C Excavator Machine Systems
Shuttle Valve - Remove - Auxiliary Control
3176C and 3196 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Assemble
325C Excavator Machine System Specifications
Final Drive
312C Excavator Machine Systems
Shuttle Valve - Install - Auxiliary Control
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Lifting and Tying Down the Machine
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators
Shipping the Machine
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
5230B Excavator Vital Information Management System (VIMS)
General Information
5230B Excavator Vital Information Management System (VIMS)
Normal Operation
5230B Excavator Vital Information Management System (VIMS)
Service Operations
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM
Attachment Code - Configure
312C Excavator Machine Systems
Accumulator - Remove and Install