Track Carrier Roller
`
330B Excavator Machine System Specifications
[SENR8969]
330B Excavator Machine System Specifications
Stick Cylinder
330B Excavator Machine System Specifications
Boom Cylinder
UNDERCARRIAGE
ROLLER GP
330B Excavator Machine System Specifications
Track Carrier Roller
330B Excavator Machine System Specifications
Track Roller Mounting
Show/hide table
![]() | |
Illustration 1 | g02559957 |
Typical example |
Show/hide table
Specification for 6Y-5323 Track Carrier Roller, 300-4545 Track Carrier Roller, 449-2274 Track Carrier Roller and 134-3010 Track Carrier Roller | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | - | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
2 | 1 | 6Y-9856 Carrier Roller Bearing | Inside diameter after assembly is |
3 | 1 | 6Y-9855 Carrier Roller Bearing | Inside diameter after assembly is |
A | - | - | End play:
Minimum is Maximum is |
4 | 1 | - | Lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed. |
B | 1 | 6Y-9858 Track Roller Shaft Assembly | Length of the track roller shaft assembly that must be free of paint before assembly is |
Information System:
305 CR Mini Hydraulic Excavator
Capacities (Refill)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
312C Excavator Machine Systems
Tank and Filter (Hydraulic) - Remove
305 CR Mini Hydraulic Excavator
Access Door and Cover Locations
312C Excavator Machine Systems
Fuel Tank - Install
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Swing Lock Pin Control
312C Excavator Machine Systems
Fuel Tank - Remove
Procedure to Reinforce the Frame Assembly Stabilizer{7222}
325D and 329D Excavators and 325D Material Handler Machine System Specifications
Fasteners - Swing Drive and Final Drive
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Temperature Sensor Open or Short Circuit - Test
312C Excavator Machine Systems
Accumulator - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Sound Information and Vibration Information
312C and 312C L Excavator
Plate Locations and Film Locations
305 CR Mini Hydraulic Excavator
Belt - Inspect/Adjust/Replace
2001/10/15
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
420D and 430D Backhoe Loaders
Quick Coupler Control (Loader) - If Equipped
420D and 430D Backhoe Loaders
Quick Coupler Operation (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Quick Coupler Operation (Backhoe) - Pin Grabber Quick Coupler (If Equipped)
305 CR Mini Hydraulic Excavator
Boom and Stick Linkage - Lubricate
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Lubricant Viscosities
432D and 442D Backhoe Loaders
Equipment Lowering with Engine Stopped
305.5 Mini Hydraulic Excavator
Bucket Tips - Inspect/Replace
345B Series II Excavator Hydraulic System
Main Control Valve