CS44 and CP44 Soil Compactor Machine System Vibratory Support Caterpillar


Vibratory Support
`
CS44 and CP44 Soil Compactor Machine System [UENR4557]


Illustration 1g06039921

Table 1
Specification for 159-9405 Vibratory Support Gp 
Item  Qty  Part  Specification Description 
030-0061 Bearing Cone  Before assembly, apply a light film of clean oil. 
030-0060 Bearing Cup  Before assembly, apply a light film of clean oil. 
7D-8637 Bearing Cup  Before assembly, apply a light film of clean oil. 
9S-8005 O-Ring Plug  Before assembly, apply a light coat of thread sealant. 
7D-8636 Bearing Cone  Before assembly, apply a light film of clean oil. 
Tighten the plugs to 66 ± 3 N·m (49 ± 2 lb ft)
077-6630 Seal  Before assembly, apply a light coat of grease. 
077-3637 Seal  Before assembly, apply a light film of clean oil. 
Tighten the sensor to 66 ± 3 N·m (49 ± 2 lb ft)
10  222-2785 Magnetic Plug  Before assembly, apply a light coat of thread sealant. 

Information System:

M315 Excavator Hydraulic System Engine Performance - Test
305 CR Mini Hydraulic Excavator Engine Oil Level - Check
325C Excavator Machine System Specifications Boom - 6150 mm (242.1 inch)
305 CR Mini Hydraulic Excavator Engine Air Filter Primary Element - Clean/Replace
3500B, 776D, 777D, 784C, 785C, 789C, 793C and and 793D Off-Highway Truck/Tractors Refrigerant Compressor
325C Excavator Machine System Specifications Boom - 5550 mm (218.5 inch)
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Controller Input and Output Values
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Speed Sensor - Replace
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Proportional Reducing Valve - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Proportional Reducing Valve Sweep - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Electronic Governor - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Digital Output On/Off - Test
M315 Excavator Hydraulic System Engine Speed - Test and Adjust - No Load
305 CR Mini Hydraulic Excavator Engine Oil and Filter - Change
315C Excavator Engine Speed Control
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Check of Governor Actuator - Troubleshoot - CID 91 - 315C, 318C, 319C, 320C, 321C, And 322C
2001/09/24 New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
5130B Excavator Hydraulic System Pilot Hydraulic System
325C Excavator Machine System Specifications Stick - M2.5D
325C Excavator Machine System Specifications Stick - M3.2C
3500B and 3500B High Displacement Generator Set Engines E017 High Engine Coolant Temperature Warning
312C and 312C L Excavator Lifting Capacities - 312C L with a Reach Boom and No Blade
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E021 High Exhaust Temperature Derate
325C Excavator Machine System Specifications Stick