325C Excavator Machine System Specifications Bucket Caterpillar


Bucket
`
325C Excavator Machine System Specifications [RENR5387]
WORK TOOLS
BUCKET GP
325C Excavator Machine System Specifications Bucket



Illustration 1g00798547

(A) Bucket teeth

(W) Width of bucket

Note: All bores for pins must be free of paint. Coat all bores for pins with lubricant.

Table 1
Bucket Assembly     Bucket Family     Type of Bucket     Number of Teeth (A)     Width of Bucket (W)     SAE Capacity (m3)     Pin Bore Diameter (1)     Pin Bore Diameter (2)     Pin Bore Diameter (3)     Wearplates    
117-1434     B     Excavation     6    
1500 mm (59 inch)    
1.35     80.1 ± 0.1 mm     80.1 ± 0.1 mm     80.1 ± 0.1 mm     Yes    
171-7985     C     Extreme Excavation     3    
750 mm (30 inch)    
0.60     80.1 ± 0.1 mm     80.1 ± 0.1 mm     124.0 ± 0.1 mm     Yes    
171-7994     C     Excavation     5    
1350 mm (53 inch)    
1.40     80.1 ± 0.1 mm     80.1 ± 0.1 mm     124.0 ± 0.1 mm     Yes    
171-7999     C     Excavation     6    
1500 mm (59 inch)    
1.60     80.1 ± 0.1 mm     80.1 ± 0.1 mm     124.0 ± 0.1 mm     Yes    
171-8000     C     Excavation     6    
1600 mm (63 inch)    
1.70     80.1 ± 0.1 mm     80.1 ± 0.1 mm     124.0 ± 0.1 mm     Yes    
172-3789     C     Excavation     5    
1250 mm (49 inch)    
1.30     80.1 ± 0.1 mm     80.1 ± 0.1 mm     124.0 ± 0.1 mm     Yes    
172-3790     C     Extreme Excavation     5    
1450 mm (57 inch)    
1.50     80.1 ± 0.1 mm     80.1 ± 0.1 mm     124.0 ± 0.1 mm     Yes    
160-9250     D     Extreme Excavation     4    
1350 mm (53 inch)    
1.50     90.1 ± 0.1 mm     80.1 ± 0.1 mm     138.0 ± 0.1 mm     Yes    
160-9252     D     Excavation     5    
1500 mm (59 inch)    
1.70     90.1 ± 0.1 mm     80.1 ± 0.1 mm     138.0 ± 0.1 mm     Yes    
160-9253     D     Extreme Excavation     5    
1500 mm (59 inch)    
1.70     90.1 ± 0.1 mm     80.1 ± 0.1 mm     138.0 ± 0.1 mm     Yes    
160-9256     D     Excavation     5    
1650 mm (65 inch)    
1.90     90.1 ± 0.1 mm     80.1 ± 0.1 mm     138.0 ± 0.1 mm     Yes    
208-6590     D     Excavation     6    
1800 mm (71 inch)    
2.20     90.1 ± 0.1 mm     80.1 ± 0.1 mm     138.0 ± 0.1 mm     Yes    

Information System:

5130B Excavator Equipment Lowering with Engine Stopped
M318 Excavator Hydraulic System Swing Brake Pressure - Test
5230 Excavator Hydraulic System Relief Valve (Main) - Test - If Equipped
5230 Excavator Hydraulic System Control Valve (Front) - Type 2
325C Excavator Machine System Specifications Bucket
305 CR Mini Hydraulic Excavator Boom/Stick/Bucket Combinations
BH27, BH30 and BH30 W Skid Steer Loader Backhoes Swing Cylinder - Remove and Install
5230 Excavator Hydraulic System Control Valve (Front) - Mass Excavator - Type 2
304.5 Mini Hydraulic Excavator Track Adjustment - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Harness and Wire Identification
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Automatic Travel Speed Change Is Abnormal - Troubleshoot - 4107, 4204, and 4207
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Travel Alarm Is Abnormal - Troubleshoot - 4108
312C and 312C L Excavator Air Inlet Heater Starting Aid
312C and 312C L Excavator Lifting Capacities - 312C with a VA Boom
5130B Excavator Lifting the Boom
3456 Engine for Caterpillar Built Machines System Configuration Parameters
315C Excavator Window (Front)
Quick Coupler Wedge Lock(Wheel Loader) Operating Technique Information
325C Excavator Machine System Specifications Bucket
312C and 312C L Excavator Specifications
3456 Engine for Caterpillar Built Machines E039 Low Engine Oil Pressure Derate
345B Series II Excavator Hydraulic System SmartBoom Hydraulic System
312C and 312C L Excavator VA Boom Controls
3456 Engine for Caterpillar Built Machines Sensors and Electrical Connectors