C13 Engines for Caterpillar Built Machines Exhaust Combustion Lines Caterpillar


Exhaust Combustion Lines
`
C13 Engines for Caterpillar Built Machines [UENR0945]
AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GP
C13 Engines for Caterpillar Built Machines Exhaust Combustion Lines



Illustration 1g02146399

(5) Exhaust combustion manifold

(8) Fuel control manifold




Illustration 2g02567556

Table 1
Specification For 344-8023 Exhaust Combustion Lines Gp and 344-8024 Exhaust Combustion Lines Gp    
Item     Qty     Part     Specification Description    
1     -     -     Torque for the pilot fuel line at the ARD combustion head is
11 to 13 N·m (95 to 115 lb in).    
2     -     -     Torque for the main fuel line at the ARD combustion head is
16 to 18 N·m (140 to 160 lb in).    
3     -     -     Torque for the coolant lines at the ARD combustion head is
20 to 22 N·m (175 to 195 lb in).    
4     -     -     Torque for the coolant lines at the exhaust combustion is
16 to 18 N·m (140 to 160 lb in).    
6     -     -     Torque for the main fuel line at the fuel control manifold is
43 to 48 N·m (32 to 35 lb ft).    
7     -     -     Torque for the pilot fuel line at the fuel control manifold is
26 to 29 N·m (230 to 255 lb in).    

Information System:

2013/08/29 Data for the Engine and Power Train for Series E Backhoe Loaders {0374, 1000, 3101, 7000}
374D Excavator Plate Locations and Film Locations
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
349F and 352F Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
349E Excavator Hydraulic System Swing Hydraulic System
349F and 352F Excavators Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
374D Excavator Leaving the Machine
Installation of the <NOBR>300-1196</NOBR> Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057}
328D CR Excavator Declaration of Conformity
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Remove and Install
C4.4 Industrial Engine Engine Crankcase Breather Element - Replace
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Fan Drive - Assemble
Installation of the 260-7976 Pilot Lines Gp on Certain 320Dand 323D Excavators{5057, 5059}
349F and 352F Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Linkage - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Water Pump - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
568 Forest Machine Hydraulic System Relief Valve (Line) - Test and Adjust
568 Forest Machine Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
568 Forest Machine Hydraulic System Relief Valve (Swing) - Test and Adjust
568 Forest Machine Hydraulic System Specifications
Installation of the 281-8245 Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057, 5057}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Crankshaft Front Seal - Remove and Install
330D and 336D Excavators and 336D Mobile Hydraulic Power Units Maintenance Interval Schedule