374D Excavator Machine System Specifications Bucket Linkage - WB Family Caterpillar


Bucket Linkage - WB Family
`


Illustration 1g03505472
Front view

Table 1
Specification for 330-2599 Bucket Linkage Gp 
Item  Qty  Part  Specification Description 
Assemble the linkage on the machine by rotating the rod end of the bucket cylinder and by positioning the grease fitting away from the stick. All bores must be free of paint. Coat all the bores for pins with 5P-0960 Grease Cartridge. 
441-0041 Pin As  Diameter is 129.850 ± 0.040 mm (5.1122 ± 0.0016 inch)
7Y-9915 Bushing  Bore before assembly is 130.32 ± 0.02 mm (5.131 ± 0.001 inch)
Installation depth is 9.65 ± 0.80 mm (0.380 ± 0.031 inch).
9X-4600 Lip Type Seal  Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. 
9X-4599 Lip Type Seal  Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. 
441-0038 Pin As  Diameter is 119.85 ± 0.04 mm (4.718 ± 0.002 inch)
198-5529 Bushing  Bore before assembly is 120.320 ± 0.020 mm (4.7370 ± 0.0008 inch)
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch).
212-2896 Pin As  Diameter is 99.85 ± 0.04 mm (3.931 ± 0.002 inch)
441-0044 Pin As  Diameter is 129.850 ± 0.040 mm (5.1122 ± 0.0016 inch)

Information System:

Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine Rear Mount - Remove and Install
374D Excavator Machine System Specifications Upper Frame
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Cylinder - Remove and Install
Installation of the 300-1191 Auxiliary Hydraulic Lines Gp {5057}
374D Excavator Machine System Specifications Stick Cylinder
349F and 352F Excavators Machine Systems Duo-Cone Conventional Seals - Install
Procedure to Replace the Counter Balance Spool for 307C/D and 308C/D Excavators {4050}
2010/08/13 A New Counter Balance Spool Helps Reduce Travel Drift for 307C/D and 308C/D Excavators {4050}
2010/04/22 Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
374D Excavator Machine System Specifications Bucket Cylinder
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine Front Mount - Remove and Install
MP15, MP20, MP30 and MP40 Multi-Processors Operation
C9.3 Tier 4 Final Engines Diesel Particulate Filter Has Changed Regeneration Interval
2010/04/30 A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Cylinder - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Speed Control Valve - Disassemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Hydraulic Rotator and Hydraulic Crusher Housing - Separate
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Engine and Main Hydraulic Pump - Remove and Install
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Swivel - Assemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Assemble
VHC-30, VHC-40, VHC-50 and VHC-60 Hydraulic Crushers Gerotor Motor - Disassemble