374F Excavator Machine System Grease Lines Caterpillar


Grease Lines
`
374F Excavator Machine System [KENR9613]
IMPLEMENTS
LINES GP-GREASE
374F Excavator Machine System Grease Lines
374F Excavator Machine System Grease Lines


Illustration 1g03503256
Typical example
Top view

Table 1
Specification for 341-5221 Grease Lines Gp and 341-5228 Grease Lines Gp 
Item  Qty  Part  Specification Description 
141-3672 Elbow As  Apply white Loctite Low Breakloose PST to the threads. 


Illustration 2g03503257
Typical example
Right side view

Table 2
Item  Qty  Part  Specification Description 
The stick cylinder must be assembled such that the grease zerk (2) is oriented as shown. Refer to Illustration 2 for proper orientation. 
5K-9243 Flared Elbow  Apply white Loctite Low Breakloose PST to the threads. 
8T-4191 Bolt  Torque to 30 ± 7 N·m (266 ± 62 lb in)
8T-4133 Nut  Torque to 30 ± 7 N·m (266 ± 62 lb in)

Information System:

303.5D, 304D, 305.5D and 305D Mini Hydraulic Excavators Engine Supplement Fuel Transfer and Priming Pump - Remove and Install
349F and 352F Excavators Hydraulic System Pump Control (Negative Flow) - Test
C4.4 Industrial Engine Electronic Control System
C4.4 Industrial Engine Power Sources
C4.4 Industrial Engine Fuel Injection
C4.4 Industrial Engine Introduction
C4.4 Industrial Engine Lubrication System
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
C4.4 Industrial Engine Basic Engine
C4.4 Industrial Engine Cooling System
C4.4 Industrial Engine Air Inlet and Exhaust System - Series Turbochargers
568 GF and 568 LL Forest Machine Securing the Machine
C6.6 Industrial Engine Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C6.6 Industrial Engine Fuel Filter Base - Remove and Install - Single Secondary Fuel Filter
C6.6 Industrial Engine Fuel Manifold (Rail) - Remove and Install
C6.6 Industrial Engine Fuel Injection Lines - Remove
C6.6 Industrial Engine Fuel Injection Lines - Install
C6.6 Industrial Engine Inlet Air Control - Remove - NRS Inlet Air Mixer
C6.6 Industrial Engine Inlet Air Control - Install - NRS Inlet Air Mixer
C6.6 Industrial Engine Fuel Injection Pump - Remove
C6.6 Industrial Engine Fuel Injection Pump - Install
C6.6 Industrial Engine Fuel Injection Pump Gear - Remove
C7.1 Industrial Engine Position the Valve Mechanism Before Maintenance Procedures
C4.4 Industrial Engine Position the Valve Mechanism Before Maintenance Procedures