Oil Filter (Hydraulic)
`
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
[UENR3839]
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Differential and Bevel Gear
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Modulating Valve (Torque Converter Lockup Clutch)
BRAKING SYSTEM
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Oil Filter (Hydraulic)
Show/hide table
![]() | |
Illustration 1 | g03101477 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | 1 | 295-6258 Filter Housing | Maximum operating pressure is Bypass setting is Maximum flow is Wet mass is Torque to Minimum clearance (A) to remove the filter housing is |
2 | 1 | 490-0662 Pressure Indicator As | Indicator is good up to Torque to Indicator activates at Indicator deactivates at |
Information System:
Procedure to Adjust Track Tension with Restricted Access to Fill Valve{7050}
2012/11/30
New Crankshaft for the C6.6 Machine Engines {1202}
2011/11/07
The Swing Bearing In the Bearing And Gear Group Is Improved on Certain 330D, 345C and 345D Excavators and 345C and 345D Mobile Hydraulic Power Units {7063}
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Assemble - Type-One
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Disassemble - Type-One
330F MHPU Mobile Hydraulic Power Unit
Fuel System Secondary Filter - Replace
320E Excavator
Fuel System Primary Filter (Water Separator) Element - Replace
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
349E Excavator Hydraulic System
Stick Hydraulic System
450E Backhoe Loader Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
450E Backhoe Loader Machine Electronic Control System
Backup Alarm Always Off
450E Backhoe Loader Machine Electronic Control System
Charging System
390D Excavator
Lifting Capacities - 390D L
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Combined Function Hydraulic System - System 17
330F MHPU Mobile Hydraulic Power Unit
Radiator Core - Clean
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Work Tool Parameter - Default Values - System 17
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Safety Messages
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Auxiliary) - Test and Adjust - Line, System 17
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Auxiliary) - Test and Adjust - Main (Medium Pressure), System 17
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Specifications
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Plate Locations and Film Locations
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Declaration of Conformity
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Daily Inspection