Boom - 5.1 m (16.73 ft)
`
315D and 318D Excavators Machine System Specifications
[RENR9735]
315D and 318D Excavators Machine System Specifications
Bucket Cylinder
315D and 318D Excavators Machine System Specifications
Bucket Cylinder
IMPLEMENTS
BOOM GP
315D and 318D Excavators Machine System Specifications
Boom - 5.1 m (16.73 ft)
315D and 318D Excavators Machine System Specifications
Boom - 5.1 m (16.73 ft)
Show/hide table
 | |
| Illustration 1 | g02806362 |
Show/hide table
| Specification for 315-0943 Boom | |||
| Item | Qty | Part Number | Specification Description |
| All bores must be free of paint. Coat all bores for the pins, the stick, the upper frame, and cylinder pin bores with 5P-0960 Grease Cartridge . | |||
| 1 | 1 | 180-7755 Pin | Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch). |
| 2 | 1 | 4I-4811 Pin As | Diameter is 69.850 ± 0.025 mm (2.7500 ± 0.0010 inch). |
| 3 | 2 | 244-4277 Bushing | Install the bushing in the bore so that the part number is facing outward. Inside diameter before assembly is 90.16 ± 0.02 mm (3.550 ± 0.001 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 4 | 1 | 267-0060 Pin As | Diameter is 89.850 ± 0.025 mm (3.5374 ± 0.0010 inch). |
| 5 | As required, use the following shims in order to adjust the maximum lateral clearance. The steel shim should be located at the boom side: Lateral clearance for Gosselies facility is 1.0 mm (0.04 inch). Lateral clearance except for Gosselies facility is 1.6 mm (0.06 inch). |
||
| 2 | 113-2127 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 093-0084 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 6 | 2 | 166-1495 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seal so that the lip type seal does not extend beyond the face of the boss. |
Information System:
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
390D Excavator Hydraulic System
Counterweight (Removal and Installation Hydraulic System)
390D Excavator Hydraulic System
One-Way Flow Hydraulic System
329E Excavator
Declaration of Conformity
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Declaration of Conformity
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Plate Locations and Film Locations
Weld Repair and Rework Procedures for the GLL Grapple Head {0679, 6307, 6700}
374D Excavator Hydraulic System
Combined Function Hydraulic System
324E Excavator
Boom/Stick/Bucket Combinations
325 VM and VH Variable Gauge Undercarriage
Recoil Spring - Assemble
325 VM and VH Variable Gauge Undercarriage
Recoil Spring - Disassemble
2010/06/02
An Improved Horn Button is Now Used On Certain CAT Product {7332, 7402}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
349F and 352F Excavators Machine System Specifications
Window Wiper and Washer
329E Excavator
Boom/Stick/Bucket Combinations
M300D Wheeled Excavator Transmission Speed Sensor Causes Error Codes{3030}
329E Excavator
Specifications
Idler Oil Fill Volume {4159, 4159}
C13, C15, and C18 Tier 4 Interim Engines
Cat ET Service Features
374D Excavator Hydraulic System
Relief Valve (Swing)
C4.4 Industrial Engine
Air Inlet and Exhaust System - Inspect
374F Excavator Hydraulic System
Travel Motor
C9.3 Engines for Caterpillar Built Machines
Unit Injector - Remove
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Air Conditioning and Heating Control