Front Lines
`
312D and 313D Excavators Machine System Specifications
[KENR6553]
312D and 313D Excavators Machine System Specifications
Control Valve - Two Pump One Way Flow
312D and 313D Excavators Machine System Specifications
Pilot Lines - System 20
HYDRAULIC SYSTEM
LINES GP-FRONT
312D and 313D Excavators Machine System Specifications
Front Lines
312D and 313D Excavators Machine System Specifications
Front Lines - Medium Pressure
312D and 313D Excavators Machine System Specifications
Front Lines
312D2 and 313D2 Excavators Machine System Specifications
Front Lines
312D2 and 313D2 Excavators Machine System Specifications
Front Lines
312D and 313D Excavators Machine System Specifications
Front Lines
312D and 313D Excavators Machine System Specifications
Front Lines - System 22
Show/hide table
 | |
| Illustration 1 | g02171413 |
Front view | |
Show/hide table
| Specification for 278-6694 Front Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 335-0158 Solenoid and Relief Valve Gp | Torque to 135 ± 10 N·m (100 ± 7 lb ft). |
| 2 | 1 | 366-9311 Pressure Sensor Gp | Before assembly, apply thin hydraulic oil to the outer diameter of male thread. Torque to 100 ± 10 N·m (74 ± 7 lb ft). |
| 3 | 1 | 266-0939 Hose As | Torque to 160 ± 16 N·m (118 ± 12 lb ft). |
Show/hide table
 | |
| Illustration 2 | g02579918 |
Right side view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 4 | 1 | 148-8357 Elbow As | Torque to 150 to 165 N·m (111 to 122 lb ft). |
| 5 | 1 | 282-7150 Hose As | Torque to 160 ± 16 N·m (118 ± 12 lb ft). |
| 6 | 1 | 282-7154 Hose As | Torque to 160 ± 16 N·m (118 ± 12 lb ft). |
| 7 | 1 | 148-8392 Elbow As | Torque to 160 ± 16 N·m (118 ± 12 lb ft). |
| 8 | 1 | 282-7476 Hose As | Torque to 160 ± 16 N·m (118 ± 12 lb ft). |
| 9 | 1 | 270-6110 Connector As | Torque to 165 ± 15 N·m (122 ± 11 lb ft). |
| 10 | 2 | 309-9973 Relief Valve Gp | Torque to 73.5 ± 4.9 N·m (54.2 ± 3.6 lb ft). |
Information System:
312D and 313D Excavators Machine System Specifications
Control Valve - Two Pump One Way Flow
312D and 313D Excavators Machine System Specifications
Pilot Lines - System 23
S365C and S385C Demolition and Scrap Shears
Jaw - Repair
S365C and S385C Demolition and Scrap Shears
Cutting Edge Bolts - Tighten
S365C and S385C Demolition and Scrap Shears
Cutters - Inspect/Replace
C27 and C32 Generator Set Engines
Fuel Lines - Remove and Install
Product Link - PL522/523
Diagnostic Capabilities
S365C and S385C Demolition and Scrap Shears
Lifting and Tying Down
S365C and S385C Demolition and Scrap Shears
Transport Position - Transport of shear on host machine
S365C and S385C Demolition and Scrap Shears
Operation
C13, C15, and C18 Tier 4 Interim Engines
Exhaust Balance Valve - Test
Product Link - PL522/523
General Information
349E Excavator Hydraulic System
Solenoid Valve (Fine Swing) - If Equipped
312D and 313D Excavators Machine System Specifications
Pilot Lines - System 20
Product Link - PL522/523
Event Code List
Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM
349E Excavator Hydraulic System
Travel Hydraulic System
Rework Procedure for the Insulation Group Around the Cooling Arrangement for 307D Excavators{7150, 7251, 726A, 7276, 7301}
Product Link - PL522/523
Reports and Messages Not Available
374D Excavator Hydraulic System
Specifications
312D and 313D Excavators Machine System Specifications
Front Lines - System 22
C4.4 Industrial Engine
Engine Oil Pump - Inspect
312D and 313D Excavators Machine System Specifications
Pump Lines (Auxiliary)
312D2 and 313D2 Excavators Machine System Specifications
Control Valve