Stick - 2.50 m (8.202 ft)
`
312D and 313D Excavators Machine System Specifications
[KENR6553]
312D and 313D Excavators Machine System Specifications
Blade Cylinder Lines
312D and 313D Excavators Machine System Specifications
Stick Cylinder
IMPLEMENTS
STICK GP
312D and 313D Excavators Machine System Specifications
Stick - 2.10 m (6.890 ft)
314D CR Excavator Machine System Specifications
Stick - 2.80 m (9.186 ft)
312D and 313D Excavators Machine System Specifications
Stick - 3.00 m (9.842 ft)
312D and 313D Excavators Machine System Specifications
Stick - 2.50 m (8.202 ft)
Show/hide table
 | |
| Illustration 1 | g02570582 |
(1) Stick cylinder group (2) Bucket cylinder group (3) Bucket linkage group (4) Bucket group (5) Boom group | |
Show/hide table
| Specification for 278-9289 Hoe Stick Gp , 308-8844 Hoe Stick Gp , 278-9290 Hoe Stick Gp, and 294-1444 Hoe Stick Gp . | |||
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use black 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores. | |||
| 6 | 2 | Install the following bushings (6) , (7) and (8) in the bore so that the part number of each bushing is facing outward. Bushing is one of the following part numbers: |
|
| 273-6814 Bushing | Inside diameter is 80.12 ± 0.02 mm (3.154 ± 0.001 inch). |
||
| Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
|||
| 240-2913 Bushing | Inside diameter is 80.20 ± 0.04 mm (3.157 ± 0.002 inch). |
||
| Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
|||
| 7 | 2 | 229-1095 Bushing | Inside diameter is 60.15 ± 0.04 mm (2.368 ± 0.002 inch). |
| Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
|||
| 8 | 2 | 229-1091 Bushing | Inside diameter is 65.19 ± 0.04 mm (2.567 ± 0.002 inch). |
| Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
|||
| 9 | 1 | 127-3913 Pin As | Diameter is 59.86 ± 0.03 mm (2.357 ± 0.001 inch). |
| 10 | 1 | 1R-6225 Pin As | Diameter is 59.86 ± 0.03 mm (2.357 ± 0.001 inch). |
| 11 | 2 | 166-1494 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 12 | 2 | 166-1492 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 13 | 2 | 248-7836 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
Information System:
C4.4 Industrial Engine
Fuel Injection Timing - Check
C4.4 Industrial Engine
Finding Top Center Position for No. 1 Piston
C4.4 Industrial Engine
Connecting Rod - Inspect
C4.4 Industrial Engine
Connecting Rod
390D Excavator Hydraulic System
Pilot Hydraulic System
390D Excavator Hydraulic System
Main Hydraulic System
Procedure to Repair Layered Doors on E Series Excavators{7273}
349E Excavator Hydraulic System
Travel Motor
320E and 323E Excavators
Cooling System Coolant Sample (Level 1) - Obtain
2010/06/23
Incorrect Use of the Engine Oil Drain Coupling on Some Large Excavators, Off-Highway Trucks/Tractors, Track-Type Tractors, Wheel Dozers, and Wheel Loaders {1306, 1308, 1318}
312D and 313D Excavators Machine System Specifications
Blade Cylinder Lines
312D and 313D Excavators Machine System Specifications
Blade Cylinder Lines
349E Excavator Hydraulic System
Bucket Hydraulic System
345D MHPU and 349D MHPU Mobile Hydraulic Power Units
Joystick Controls Alternate Patterns - If Equipped
2010/06/25
A New Multi Combined Function - Work Tool Valve (MCV) is Now Used on Certain Wheeled Excavators {5064}
320E and 323E Excavators
Engine Oil Level - Check
320E and 323E Excavators
Engine Oil and Filter - Change
450F Backhoe Loader Hydraulic and Steering System
Control Valve (Extendable Stick) (Mechanically Operated)
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators
Safety Messages
312D and 313D Excavators Machine System Specifications
Stick Cylinder
450F Backhoe Loader Hydraulic and Steering System
Control Valve (Boom) (Mechanically Operated)
2010/07/21
The Stick Support Pin Is Improved on Certain Small Excavators {6501}
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 2429 - FMI 06
S365C and S385C Demolition and Scrap Shears
Rotator Head Bolts - Check