312D and 313D Excavators Machine System Specifications Stick Cylinder Caterpillar

Stick Cylinder

312D and 313D Excavators Machine System Specifications [KENR6553]

312D and 313D Excavators Machine System Specifications Stick - 2.50 m (8.202 ft)

312D and 313D Excavators Machine System Specifications Manifold and Reducing Valve (Pilot Oil)

HYDRAULIC SYSTEM

CYLINDER GP

312D and 313D Excavators Machine System Specifications Boom Lines

312D and 313D Excavators Machine System Specifications Boom Cylinder

311D Excavator Machine System Specifications Bucket Cylinder

314D CR Excavator Machine System Specifications Stick Cylinder

314D CR Excavator Machine System Specifications Bucket Cylinder

314D CR Excavator Machine System Specifications Blade Lift Cylinder

312D and 313D Excavators Machine System Specifications Boom Cylinder Lines

Show/hide table




Illustration 1	g02573480

Show/hide table

Table 1
Specification for 315-3306 Stick Cylinder Gp
Item	Qty	Part	Specification Description
1	1	114-0763 Bushing	Outside diameter is 135.153 ± 0.033 mm (5.3210 ± 0.0013 inch). Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch).
2	1	170-9850 Buffer Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
3	1	216-0008 U-Cup Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
4	1	165-9293 Lip Type Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
5	-	-	Before assembly, apply green Loctite 609 to the wiper seal groove.
6	1	126-1956 Bushing	Inside diameter before assembly is 100.29 ± 0.02 mm (3.948 ± 0.001 inch). Installation depth is 10.00 ± 0.20 mm (0.394 ± 0.008 inch).
7	2	204-2845 Ring	Lubricate the inside diameter and the outside diameter with clean grease.
8	1	125-1286 Seal As	Lubricate the inside diameter and the outside diameter with clean grease.
9	1	204-2846 Ring	Lubricate the inside diameter and the outside diameter with clean grease.
10	1	315-3314 Piston	Use any one of the following methods to tighten the piston: 1. Lubricate the threads of the piston with 309-6932 Hydraulic Oil and tighten to 20500 ± 1000 N·m (15120 ± 738 lb ft). 2. Lubricate the threads of the piston with molybdenum disulfide and tighten to 13500 ± 700 N·m (9957 ± 516 lb ft).
B	1	316-6251 Rod As	Diameter is 129.930 ± 0.030 mm (5.1153 ± 0.0012 inch).
C	1	315-3310 Hydraulic Cylinder	Diameter is 190.00 ± 0.10 mm (7.480 ± 0.004 inch).
D	1	126-2047 Head	Bore of the head over two lands is 130.630 ± 0.030 mm (5.1429 ± 0.0012 inch).
11	1	228-5618 Bushing	Inside diameter before assembly is 100.29 ± 0.04 mm (3.948 ± 0.002 inch). Installation depth is 10.00 ± 0.30 mm (0.394 ± 0.012 inch).
12	1	103-8353 Stop	Free linear movement of stop after assembly is 0.40 ± 0.36 mm (0.016 ± 0.014 inch).
13	2	095-0930 Retaining Ring	Maximum outside diameter of two retaining rings after assembly is 81.0 mm (3.19 inch).
14	1	200-3620 Seal Ring	The slit of the seal ring must turn in the direction of the piston.
15	2	095-1280 Socket Setscrew	Before assembly, apply blue Loctite 242 to the threads. Torque to 125 ± 10 N·m (92 ± 7 lb ft).