Travel Lock Magnet
Illustration 1 | g00853069 |
Illustration 2 | g00920562 |
The travel lock magnet will hold down the travel pedal in the fully depressed position. The magnet operates in the forward direction. The magnet allows the operator to maintain a request for maximum machine speed without continuously depressing the pedal.
The signal wire for the travel lock magnet is connected to the machine ECM at contact J2-60 (M956-GY). The ground is contact J2-49 (wire H802-GY). See Systems Operation, "Travel Speed Lock Function" for more information.
Travel Alarm Horn
Illustration 3 | g00391203 |
Illustration 4 | g00925968 |
The travel alarm horn sounds when the machine is traveling. The signal wire for the horn is connected to the machine ECM at contact J2-44 (wire 321-BR). The ground is contact J2-36 (wire H807-YL). See Systems Operation, "Travel Alarm Function" for more information.