325D and 329D Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve Caterpillar


Bypass Valve (Return) - Bypass Check Valve
`
325D and 329D Excavators Hydraulic System [RENR7384]
HYDRAULIC SYSTEM
VALVE GP-BYPASS
325D and 329D Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve


Illustration 1g00821053
(19) Return filter
(25) Hydraulic tank
(33) Return line


Illustration 2g01341102
Slow return check valve and bypass check valve
(5) Makeup line (makeup oil to swing motor)
(16) Return line
(17) Slow return check valve
(24) Bypass check valve
(28) Check valve
(29) Inlet line to hydraulic oil cooler (18)
(30) Return line to bypass check valve
(33) Return line (return flow to return filter)

The return oil flow through slow return check valve (17) is divided into two flow paths. A portion of the oil flows through inlet line (29) to the hydraulic oil cooler and the remainder of the return oil flows through bypass check valve (24).

When the temperature of the return oil in inlet line (29) is very low, the viscosity of the oil is high. The flow resistance of the return oil in inlet line (29) is high. Thus, the pressure of the return oil is high.

As a result of the high pressure of the return oil, bypass check valve (24) opens. Most of the return oil flows through bypass check valve (24), return line (33) and return filter (19) to hydraulic tank (25). The remainder of the oil flows through inlet line (29) to the hydraulic oil cooler. Since a small amount of the return oil flows to the oil cooler, the temperature of the oil increases.

As the oil temperature increases, the return oil pressure decreases. Bypass check valve (24) begins to close. A greater portion of the return oil flows to the hydraulic oil cooler. Bypass check valve (24) maintains the hydraulic oil at the optimum operating temperature.

Information System:

325D and 329D Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor Solenoid - Test
325C Excavator Hydraulic System Return Hydraulic System
322C Excavator Hydraulic System Swing Hydraulic System
325C Excavator Hydraulic System Travel Counterbalance Valve
3046 Engine For Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
M313C and M315C Excavators Axle Oil (Rear) - Change
Quick Coupler Wedge Lock(Wheel Loader) Model View Illustrations
W345B Series II Material Handler Hydraulic System Pilot Valve (Joystick)
2001/10/15 Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506}
312C Excavator Machine Systems Blade Cylinder - Install
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Shipping the Machine
312C Excavator Machine Systems Blade - Remove and Install
3126B Engine for Caterpillar Built Machines Throttle Lock Switch Circuit - Test
3046 Engine for Caterpillar Built Machines Water Pump - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Solenoid Valves
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Related Components
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control General Information
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Using Service Mode
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Parameter Status Checks
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Using Caterpillar Electronic Technician
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Troubleshooting Diagnostic Codes
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control General Information (Electrical System)
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Start and Stop Circuit