PRODUCT LINE ADDITIONS: REMANUFACTURED 3054 ENGINES FOR MEDIUM WHEEL AND TRACK HYDRAULIC EXCAVATORS Caterpillar


`
PRODUCT LINE ADDITIONS: REMANUFACTURED 3054 ENGINES FOR MEDIUM WHEEL AND TRACK HYDRAULIC EXCAVATORS [PEL05260]
ENGINE ARRANGEMENT
PRODUCT LINE ADDITIONS: REMANUFACTURED 3054 ENGINES FOR MEDIUM WHEEL AND TRACK HYDRAULIC EXCAVATORS
 Information Release Memo

REM05-12 

 
  AVS?

Reman  

 

 May 2005

PRODUCT LINE ADDITIONS: REMANUFACTURED 3054 ENGINES FOR MEDIUM WHEEL AND TRACK HYDRAULIC EXCAVATORS


Announcement

AVSpare? Remanufactured Products Group announces the expansion of the remanufactured product line to include four 3054 engine arrangements for the medium wheel and track hydraulic excavators (see table below for product coverage).

Coverage

Features & Benefits

These engines are intended to supplement dealer rebuild capability with a complete engine repair alternative that can be used as either back up or the primary service solution. Priced competitive to re-builders, they provide the dealer with a cost effective repair option and fast turnaround for the customer.

Consist

Reman 3054 engines come fully assembled and dynamometer-tested. The flywheel, starter, alternator, and associated wiring must be reused from the core engine or purchased separately.

Regulatory Compliance

The Remanufactured 3054 engines are of the same design with regard to exhaust and noise emissions as their respective original engine in the table above. As such, they are designed to produce emissions levels identical to the original engine. However, it should be noted that Remanufactured replacement engines require no emissions certification for either EPA or EU, on or off-highway. As such, typical AVSpare Remanufactured engines do not carry labeling specifying a particular emissions level.

Core Acceptance

All engines returned as cores must meet the core acceptance guidelines as identified in the "Core Acceptance Criteria" SELD0266.

Core Management

Please refer to the AVSpare? Core Management Information System (CMIS 2) Parts Information application describing all reman part/CAF and related information. Also refer to other CMIS 2 inquiry applications such as Customer Profiles, Inspection Reason Codes, Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry, CCR Inquiry, CCR Entry, Shipment Processing, Process Packaging Grief, and Reporting to properly manage core returns and monitor inspection performance. This information will be available to all dealers worldwide after your CMIS 2 conversion date.

For the latest updates of Reman Policies and Core Management (SELD0122), Core Management Systems & Operations Procedures (SELD0040) and Shipping Instructions (SELD0039), go to the Reman website and click on Procedures and Policies (listed under Reman Program Information). If you have core return processing questions, please call your Corinth Dealer Service Representative: (800) 537-2928 or e-mail: Reman_core_operations@cat.com.

For assistance with technical questions, please call Peoria Reman Customer Satisfaction Help Line: (888) 88-REMAN (887-3626) or use e-mail: reman_help@cat.com.

 

 
 
PELJ0526

AVSpare?

?2005 AVSpare

Information System:

User's Guide for the 169-0720 00000000000Vibration Analyzer Group{0000}
Caterpillar 189-1720 Analog Gauge Tester Group{0785}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 149-4935 Measuring Group on A6, A7, and A8 Rexroth Hydraulic Pump and Motor Groups{0784}
Using The 1U-6275 Or 1U-6276 Automatic Lubricator To Service The Undercarriage{0729, 4159, 4175, 4180, 0646}
Using The Caterpillar TechStation{1000, 0781, 0785}
9U-7500 Transmission Analyzer II{3030, 0783}
Using the 233-7191, 233-7192, 233-7193 and 265-4959 hose cleaning groups{5050}
Installing a Calibration Fluid Suction Port on the Fuel Injection Equipment Test Stand{0782}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
General Maintenance And Troubleshooting For Fuel Injection Equipment Test Stands (FIETS) And 5P-4150 Nozzle Tester{0784}
1U-6161 Wire Feeder{0679, 0709}
REMANUFACTURED 3500 TURBOCHARGERS FOR EARTHMOVING APPLICATIONS
REMANUFACTURED TURBOCHARGERS FOR 3116 AND 3306 GENERATOR SETS
COMPETITIVE ENGINE REPOWER AND CATERPILLAR ENGINE UPGRADE PROGRAMS BEING CANCELED
REMANUFACTURED 3406 SHORT BLOCK PRODUCT LINE EXPANDED
REMANUFACTURED PRODUCTS AVAILABLE FOR C-15 AND C-16 ON HIGHWAY TRUCK ENGINES
NACD DEALER ADVANCE CORE CREDIT PROCEDURE FOR WARRANTY PARTS RETURN REQUESTS (PRR'S)
REMANUFACTURED PISTON PACKS FOR MEDIUM DUTY, 3116 AND 3126, ENGINES
PRODUCT LINE ADDITION: REMANUFACTURED 3126B ENGINES
REMANUFACTURED 3304 SHORT BLOCK PRODUCT LINE ADDITION
REMANUFACTURED VALVE ROCKER ARMS FOR 3114, 3116 AND 3126 MUI ENGINES
REMANUFACTURED ENGINE PRODUCT LINE CANCELLATIONS
PRODUCT ADDITION: REMANUFACTURED 3176C/3196 CYLINDER HEADS