REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS Caterpillar


`
REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS [PELE0854]
ENGINE ARRANGEMENT
ENGINE AR
REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS
 Information Release Memo

REM01-41 

 
  AVS?

Reman  

 

August 2001    

REMAN ENGINE PRODUCT LINE ADDITION: REMANUFACTURED 3408 & 3412 ENGINES FOR OFF-HIGHWAY TRUCKS

PRODUCT

AVSpare announces Remanufactured 3408 and 3412 engines for three models of off highway
trucks. These products are intended to supplement dealer rebuild capability with
complete engine repair alternatives that can be used as either back-up or primary solutions.
Detail of the offerings is listed in the following table:

Machine Application 769C 769D, 771D 773B
Reman Part Number 0R2785 0R3966 0R3968
Engine Model 3408 3408E 3412
Type Mechanical Electronic Mechanical
Rating 474 hp @ 2000 rpm 510 hp @ 2000 rpm 682 hp @ 2000 rpm
Corr. New Part No. 2W0769 131-4876 1W0773
Availability Date August 1, 2001 September 1, 2001 December 1, 2001

Reman engine 0R3966 is built to reference engine arrangement 131-4876 which was Tier I
certified and will produce emissions typical of the reference engine.

CONSIST

Reman engines come fully assembled and dyno-tested. These engines include hydraulic or
transmission oil coolers as appropriate and an air compressor. The rear engine-mounting
hardware, flywheel, alternator, fan drive, and associated wiring must be reused from the core
engine or purchased separately. Each Reman engine arrangement can also replace its
associated acceptable core part numbers (listed below) with minimal exchange of parts.

AVSpare?s cleaning, inspection and remanufacturing specifications provide the best
possible value for our customers.

CORE RETURNS

Following are the only acceptable cores for each Reman engine:

Reman Part
Number
Acceptable Core
Part Numbers
0R2785 2W0769
0R3966 131-4876, 144-3575, 203-2788
0R3968 1W0773

 

All engines returned as cores must meet the core acceptance guidelines as identified in the
"Core Acceptance Criteria", SELD0231 which is under development at this time and due for
publication later this year. In the interim, reference SELD0019 with the following additions:

? The engine must "bar over".
? There is a core return time limit as described in the section below.

Also see SELD0020 "Engine Check List".
Please refer to the AVSpare Core Management Information System (CMIS 2) Parts
Information application describing all Reman part/CAF and related information. Also refer
to other CMIS 2 inquiry applications such as Customer Profile, Inspection Reason Codes,
Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry,
CCR Inquiry, CCR Entry, Shipment Processing; Process Packaging Grief; and Reporting to
properly manage core returns and monitor inspection performance. This information will be
available to all dealers worldwide after your CMIS 2 conversion date. In the meantime,
please continue to use the current CMIS Entitlement Parts Inquiry Screen describing the list
of parts in a Core Acceptability Family (CAF) and related part number detail.

For the latest updates of Reman Policies and Core Management (SELD0122), Core
Management Systems & Operations Procedures
(SELD0040), and Shipping Instructions
(SELD0039), go to the Reman website and click on Procedures and Policies (listed under
Reman Program Information).

If you have any questions regarding core return processing, feel free to call Corinth toll free
at (800) 537-2928.

CORE RETURN TIME LIMIT

The current Major Component Core Attrition Policy will be used for part numbers within the
ECA and ECB Core Acceptability Family (CAF's) because of the application of these
products.

The current core return time limit of 180 days in NACD, 240 days in CAPL and CCL, and
210 days in all other parts of the world including CSARL, CofA, and CACo will be used.
Expired entitlements on cores not returned within the designated time limit will be attritioned
(cancelled), resulting in the
dealer forfeiture of the core deposit made at the time the engine
was purchased.

The appropriate core attrition date is assigned at the time of invoicing. For the purpose of
core entitlement aging, the clock starts on the date the engine is invoiced to the dealer and
stops on the date the core is reported in transit to Cat by entering a core credit request (CCR)
into CMIS.

The purpose of the time limit is not to withhold core refunds, but to encourage the return of
cores that are required to support the program.

Any cores returned in excess of entitlements can earn only direct purchase price if a direct
purchase program is active at that time. Direct purchase prices are normally significantly
less than current core deposit prices.

WARRANTY

Please refer to the appropriate AVSpare warranty statement.

For assistance with technical questions, call the Peoria Reman Customer Satisfaction Hot Line
also toll free at (888) 88-REMAN or use our E-mail address--Reman_Help@cat.com.


RJ Williams
Remanufactured Products Group
LC2148 ? (309) 494-1245

 

 
PEL0854

AVSpare?

?2003 AVSpare

Information System:

REMANUFACTURED DAMPER FOR THE 3500 ENGINE
REMANUFACTURED TRANSMISSION OIL PUMPS FOR OFF-HIGHWAY TRUCK VEHICLES
CHANGE OF REMAN CORE ACCEPTANCE CRITERIA FOR PISTON PUMP AND MOTOR GROUPS
Product Line Additions: Remanufactured Pumps and Motors
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
REMANUFACTURED VALVE ROCKER ARMS FOR THE 3500 ENGINE
REMANUFACTURED VALVE LIFTERS FOR THE 3500 ENGINE
CHANGES TO DIRECT PURCHASE PROGRAM FOR ENGINES
REMANUFACTURED SEA WATER PUMPS FOR 3400 AND 3500 ENGINES
REMANUFACTURED STARTER AND ALTERNATOR FOR VARIOUS 3054, 3054B & 3056 INDUSTRIAL ENGINE AND MACHINE APPLICATIONS
REMANUFACTURED STARTER FOR 311, 312, 320 AND 320B HEX
REMANUFACTURED TURBOCHARGERS FOR VARIOUS CONSTRUCTION MACHINES
TERMINATION OF OVERSIZE HYDRAULIC CYLINDER PROGRAM
REMAN PRODUCT LINE ADDITION: 3456 SHORT BLOCK
CHANGE OF CORE ACCEPTANCE FOR REMANUFACTURED MID-RANGE ENGINES
REMANUFACTURED MAJOR COMPONENTS AVAILABLE FOR 988G WHEEL LOADERS AND 834G/836G WHEEL LOADERS
CHANGES TO 3406 AND C-15, C-16 WATER PUMPS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
NEW SHIPPING & PACKAGING INSTRUCTIONS FOR REMAN 3500 ENGINE CORES
CHANGE OF CORE CRITERIA FOR REMAN CRANKSHAFTS
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES FOR VARIOUS MACHINES AND ENGINES
REMANUFACTURED DAMPERS FOR THE 3500 AND 3600 ENGINES
REMANUFACTURED SHORT BLOCKS FOR DIESEL 3500B SERIES MACHINE AND COMMERCIAL ENGINES THAT USE 101-0829 PISTON - ROD GP.