UPDATED Clamp Master Links for SystemOne Undercarriage
[PELJ1175]
UNDERCARRIAGE
LINK GP-TRACK
UPDATED Clamp Master Links for SystemOne Undercarriage
Show/hide table
| Information Release Memo | |||||
| AVS? | Undercarriage | ||||
| August 2010 | |||||
| UPDATED Clamp Master Links for | |||||
| SystemOne Undercarriage | |||||
| A new Clamp Master Link is available for the following specific machine models: | |||||
| Low Sprocket Tractors D3C/G/K, D4C/G/K, D5K, D6K | |||||
| 953, 963 | |||||
| Elevated Sprocket D6H/R/T, D6M/N | |||||
| The new clamp master links incorporate a center strut for improved strength and rigidity. The ability to easily remove the track is a key feature of the clamp master link on SystemOne UC. The clamp master can be taken apart by removing the bolts from the master link instead of requiring tooling to press the link on or off. The master link retains the same unique SystemOne ?straight? link design and provides unmatched reliability and durability of SystemOne Undercarriage. | |||||
Show/hide table |
|||||
| Part Number Information | |||||
| Parts are now available in Morton for the SystemOne Clamp Master links. | |||||
| Undercarriage systems require 2 Clamp Master Links and 4 bolts per track and master shoe. | |||||
| Model | Clamp Master Link | Clamp Master Link | Clamp Master Bolt | ||
| Part Number OLD | Part Number NEW | Part Number | |||
| D6H/R/T 963 | 198-7722 | 318-1064 | 254-0224 | ||
| D6N/M 953 | 235-2619 | 318-2375 | 254-0225 | ||
| D5N/M | 235-2620 | -- | 254-0227 | ||
| D5K/D6K | 235-2621 | 318-2486 | 254-0227 | ||
| D5G | 235-2620 | -- | 254-0227 | ||
| D3/4G/K | -- | 311-6180 | 254-0228 | ||
| Shoe Information | |||||
| SystemOne Clamp Master links typically require a special master shoe.? Please refer to the UC PSK (PECP3003) for more information. | |||||
| Bolt Torqueing Procedure | |||||
| It is important to follow the bolt torque turn procedure in order to ensure a healthy bolted joint. Refer to REHS2220. | |||||
| New Clamp Master | |||||
| Master links with center strut | |||||
| Track Size | Bolt Size | Initial Torque | Additional Turn | ||
| D6T, D6R, D6H, 963 | 22 mm | 370 +/- 20 lb ft (500 +/- 25 N-m) | 180? | ||
| D6N, D6M, D5H, 953 | 20 mm | 300 +/- 20 lb ft (400 +/- 25 N-m) | 180? | ||
| D6K, D5K | 18 mm | 260 +/- 20 lb ft (350 +/- 25 N-m) | 120? | ||
| D4K, D4G, D4C, D3K, D3G, D3C | 16 mm | 165 +/- 20 lb ft (225 +/- 25 N-m) | 120? | ||
| Turn each bolt the additional amount shown in the chart. | |||||
| Former Non-Strutted Clamp Master Design | |||||
| Master links with no center strut | |||||
| Track Size | Bolt Size | Initial Torque | Additional Turn | ||
| D6T, D6R, D6H, 963 | 22 mm | 300 +/- 20 lb ft (400 +/- 25 N-m) | 360? * | ||
| D6N, D6M, D5H, 953 | 20 mm | 220 +/- 20 lb ft (300 +/- 25 N-m) | 360? * | ||
| D6K, D5K | 18 mm | 180 +/- 20 lb ft (250 +/- 25 N-m) | 360? * | ||
| D5C, D5G, D5N | 16 mm | 180 +/- 20 lb ft (250 +/- 25 N-m) | 360? * | ||
| Turn each bolt the additional amount shown in the chart. | |||||
| * For master links with no center strut, perform a 90? turn on each of the four bolts then repeat the 90? turn three more times for a total of 360? | |||||
| Contact Information? | |||||
| Thomas Rohn | Customer Interaction Center | ||||
| AVSpare Inc. | Toll Free: (877) 228-2420 | ||||
| Customer Services Support | International: (309) 578-6298 | ||||
| Undercarriage Marketing | E-mail: CIC@cat.com | ||||
| Phone: (309) 578-1746 | |||||
| E-mail: Rohn_Thomas_D@Cat.com | |||||
| PELJ1175-01 | AVSpare? | ?2010 AVSpare | |||
Information System:
CAT REMAN ANNOUNCES ADDITION OF LONG BLOCKS TO PREVIOUSLY ANNOUNCED SHORT BLOCK OPTIONS FOR CAT� C13 MACHINE APPLICATIONS
Information Release Memo
UPDATES TO MAJOR COMPONENT PPC LIST
CAT REMAN ANNOUNCES ADDITIONAL FUEL TRANSFER PUMP FOR CERTAIN 3400, C-12, AND C15 ENGINES
CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS
D10 IMPROVED THRUST RING DESIGN
UNDERCARRIAGE RELATED IRM LISTING
ROTATING BUSHING TRACK (RBT) UNDERCARRIAGE CANCELLATION
CAT REMAN ANNOUNCES ADDITIONAL INJECTORS AND FUEL NOZZLES FOR CERTAIN C9, 3306, AND 3306B ENGINE MODELS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
CAT REMAN ANNOUNCES ADDITIONAL TURBOCHARGERS FOR CERTAIN C13 AND 3516B ENGINE MODELS
Reman Expands Compact 3000 Series Engine Product Line
EXPANSION OF REMAN HYDRAULIC PISTON PUMP & MOTOR PRODUCTS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
REMAN EMISSIONS LABELING
IMPROVED TRACK ROLLERS FOR D10N/R/T
EXTREME SERVICE TRACK SHOE WIDTH CHANGE FOR D10N/R/T
CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS
CAT REMAN ANNOUNCES AN IMPORTANT UPDATE TO THE PROCESS FOR CORRECTLY IDENTIFYING ELECTRONIC CONTROL PART NUMBERS.
NEW TRACK ROLLERS FOR D7 FAMILY MACHINES
C32 SHORT BLOCK UPDATE AND ADDITIONAL REMAN ENGINES FOR MINING AND OTHER CAT MACHINES
PRODUCT LINE ADDITIONS: REMANUFACTURED C1.5, C2.2, C4.4, & C6.6 ENGINES FOR MACHINE AND COMMERCIAL ENGINE APPLICATIONS
NEW D6H/R/T SYSTEMONE RELIEVED TREAD IDLER (RTI)
REMAN SEED POLICY & PROCESS FOR MEGA ORDERS