| Show/hide table
|
||
| Show/hide table
|
||
|
June 2010 |
EXTREME SERVICE TRACK SHOE WIDTH CHANGE FOR D10N/R/T
The width of the D10N/R/T 31.5? (800mm) wide
Extreme Service track shoe has been changed to 31? (786mm). The change was made
to provide adequate clearance between the track shoe and the radiator guard.
Affected Models
All D10N/R/T Track Type
Tractors.
Benefits
On April 1, 2010, the D10T Track Roller Frame was changed from
Toe-out/Camber/Yaw to Camber Only. This change, combined with the increase in
width of the radiator guard, necessitates a narrower shoe to prevent
interference. The new 31? wide shoe allows clearance while providing similar
flotation as the previous 31.5? wide shoe.
Effective Dates
Effective April 1, 2010,
D10T track type tractors beginning with RJG02171 and up will make use of the new
width.
Track
Groups
|
||
|
New Part Number
31? (786mm) |
Old Part Number
31.5? (800mm) |
Description |
|
307-2011 |
7T-4606 |
PPR Track Group, ES shoes |
|
307-2012 |
172-3916 |
PPR Track Group,
Trapezoidal hole ES shoes |
|
307-2013 |
195-4579 |
PPR Track Group,
Clipped ES shoes |
|
307-2014 |
-- |
PPR Track Group,
ES ARM shoes |
Regular
Track Shoes
|
||
|
New Part Number
31? (786mm) |
Old Part Number
31.5? (800mm) |
Description |
|
307-2004 |
7T-4605 |
ES shoe |
|
307-2007 |
234-6032 |
Trapezoidal hole
ES shoe |
|
307-2006 |
195-4576 |
Clipped ES shoe |
|
307-2009 |
243-4374 |
ES ARM shoe |
Master
Track Shoes
|
||
|
New Part Number
31? (786mm) |
Old Part Number
31.5? (800mm) |
Description |
|
307-2005 |
9W-1869 |
ES Master shoe |
|
307-2008 |
234-6028 |
Trapezoidal hole
ES Master shoe |
|
307-2005 |
9W-1869 |
Clipped ES Master
shoe |
|
307-2010 |
243-4375 |
ES ARM Master shoe |
Adaptable to:
These changes are
adaptable to the machines listed below, and the new part numbers are direct
replacements for the old. The old part number shoes should not be used on D10T
tractors.
Track Type Tractor:
D10N (2YD, 3SK)
D10R (3KR, AKT)
D10T (RJG)
Contact Information
Todd Borrowman
AVSpare Inc.
Toll Free: (877) 228-2420
Core Components Division
International: (309) 578-6298
|
AVS, AVSpare, their respective logos, ?AVSpare Yellow? and
the POWER EDGE trade dress, as well as corporate and product
identity used herein, are trademarks of AVSpare and may not be
used without permission.
The information contained herein is intended for circulation only to
AVSpare and dealer employees whose duties require knowledge of
such reports and is intended exclusively for their information and
training. Any reproduction of this release without the foregoing
explanation is prohibited.
This IRM can be viewed and downloaded electronically from the
Internet. Please refer to your marketing organization specific site
for access to the Electronic Sales Library which contains all of the
active IRMs and product support communication materials.
|
Phone: (309)
675-2013
E-mail: Borrowman_Todd_H@cat.com
|
AVS, AVSpare, their respective logos, ?AVSpare Yellow? and
the POWER EDGE trade dress, as well as corporate and product
identity used herein, are trademarks of AVSpare and may not be
used without permission.
The information contained herein is intended for circulation only to
AVSpare and dealer employees whose duties require knowledge of
such reports and is intended exclusively for their information and
training. Any reproduction of this release without the foregoing
explanation is prohibited.
This IRM can be viewed and downloaded electronically from the
Internet. Please refer to your marketing organization specific site
for access to the Electronic Sales Library which contains all of the
active IRMs and product support communication materials.
|
| Show/hide table
|