IMPROVED SUPER EXTREME SERVICE (SES) TRACK SHOES ARE NOW AVAILABLE FOR D10 TRACK-TYPE TRACTORS Caterpillar


`
IMPROVED SUPER EXTREME SERVICE (SES) TRACK SHOES ARE NOW AVAILABLE FOR D10 TRACK-TYPE TRACTORS [PELJ1640]
UNDERCARRIAGE
TRACK GP
IMPROVED SUPER EXTREME SERVICE (SES) TRACK SHOES ARE NOW AVAILABLE FOR D10 TRACK-TYPE TRACTORS
 Information Release Memo

 
  AVS?

Undercarriage  

 

May 2014   

 

IMPROVED SUPER EXTREME SERVICE (SES)
TRACK SHOES ARE NOW AVAILABLE FOR
D10 TRACK-TYPE TRACTORS

 

 

Summary

D10 SES track shoes with new geometry on the trailing edges are now available on the machines listed below. The new design reduces the nominal gap between the leading edge of one shoe and the trailing edge of the next shoe. The new profile also eliminates the need for the spot faces at the bolt holes on all but the master shoes.

Current Machine Coverage

            Machine Models                

D10 PS 114GA (S/N: 84W1-UP)
D10 PS 106GA (S/N: 76X1-UP)
D10N (S/N: 2YD1-UP; 3SK1-UP)
D10R (S/N: 3KR1-UP; AKT1-UP)
D10T (S/N: RJG1-UP)

      

Part Numbers

 

Part numbers for the new design shoe section remain the same. Inventory may be mixed until the old shoe sections are exhausted. There are no issues mixing shoe sections.

 

REFER TO UNDERCARRIAGE PSK (PECP3003-07) FOR AN ENTIRE LISTING OF D10 EXTREME SERVICE AND SUPER EXTREME SERVICE TRACK SHOES. 

 

Contact Information:

                        Global Dealer Solutions Network
                       
Parts Technical Support Team
                       
Toll Free - North America:  1-877-228-2420
                       
International: +1-309-266-4421

                       
Electronic Requests:

                        Send via Microsoft Customer Relationship Management (MSCRM)
           
           For access and tutorial information: https://gdsn.cat.com/mscrm

AVS, AVSpare, their respective logos, ?AVSpare Yellow? and the ?Power Edge? trade dress, as well as corporate and product identity used herein, are trademarks of AVSpare and may not be used without permission.

 

The information contained herein is intended for circulation only to AVSpare and dealer employees whose duties require knowledge of such reports and is intended exclusively for their information and training. Any reproduction of this release without the foregoing explanation is prohibited.

 

This IRM can be viewed and downloaded electronically from the Internet. Please refer to your marketing organization specific site for access to the AVSpare Media Information Center which contains all of the active IRMs and product support communication materials.

 

? 2012 AVSpare Inc.  All Rights Reserved

 

 
PELJ1640

AVSpare?

?2014 AVSpare

Information System:

259/279/289/299 CTL GENERAL DUTY TRACK INTRODUCTION
NEW LINK ASSEMBLIES ARE AVAILABLE FOR FORESTRY MACHINES AND TRACK FELLER BUNCHERS
Improved 345 & 349 HEX PPR2 Track Link
D7 IDLERS HAVE CHANGED FROM CAST TO FABRICATED DESIGN
Positive Pin Retention 2 (PPR2) Track Link Assemblies are Now Used on Certain 324D Forest Machines
D10 Single Tooth Master Link Improved Design
D8N/R/T GENERAL DUTY  UNDERCARRIAGE INTRODUCTION
Improved D6H/R/T Heavy Duty Track Link
CAT REMAN ANNOUNCES ADDITIONAL 3126, 3406 AND C27 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS
247/257/267/277/287/297 MTL GENERAL DUTY RUBBER TRACK INTRODUCTION
DEALER INSTALLED STEEL TRACK KIT FOR CAT COMPACT TRACK LOADERS
D7H/R GENERAL DUTY UNDERCARRIAGE INTRODUCTION
CAT REMAN ANNOUNCES ADDITIONAL C11, C13, C15, C18, C27 AND C32 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
EXPANSION OF REMAN HYDRAULIC PUMPS AND MOTORS
CAT REMAN ANNOUNCES ADDITIONAL ENGINE AND LONG BLOCK OPTIONS FOR CAT INDUSTRIAL AND MACHINE APPLICATIONS
IMPROVED TRACK ROLLER GROUPS 385B, 385C, AND 390D HYDRAULIC EXCAVATORS
IMPROVED TRACK ROLLER GROUPS 365B, 365C, AND 374D HYDRAULIC EXCAVATORS
CAT REMAN ANNOUNCES ADDITIONAL C7, C9, C15 AND 3116 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT INDUSTRIAL APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL 3116, 3126, C-9 AND 3176 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
IMPROVED SystemOne TRACK CARTRIDGE AVAILABLE ON CERTAIN
CAT REMAN ANNOUNCES ADDITIONAL SHORT BLOCK OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
330/336 GENERAL DUTY UNDERCARRIAGE INTRODUCTION