NEW TRACK ROLLERS FOR TRACK SKIDDERS Caterpillar


`
NEW TRACK ROLLERS FOR TRACK SKIDDERS [PELJ1772]
UNDERCARRIAGE
ROLLER GP
NEW TRACK ROLLERS FOR TRACK SKIDDERS
 Information Release Memo

 
  AVS?

Undercarriage  

 

January 2015   

 

NEW TRACK ROLLERS FOR TRACK SKIDDERS

 

New track rollers are available for the following Track Skidder models:

D4H TSK
D5H Custom Skidder
D5H TSK
517 TSK
527 TSK

The new track roller is a standardization of "Medium Size" track rollers for use with Sealed and Lubricated, Hybrid (Enhanced SALT), and Heavy Duty track. The new design separates the mounting caps from the seal collar to eliminate flexing in the collars and avoid oil loss. These rollers are maintenance free and serviced as a group only.

Part Number Information

The attached table includes what should be used to select the correct replacement parts for the track roller groups, rim assemblies (shells), and shafts. Replacement of track roller groups, rim assemblies (shells) or shafts will be service replaced by an entire track roller group. Each new roller group requires; two (2) caps, four (4) bolts, and four (4) washers.

Old Roller Gp P/N

New Roller Gp P/N

SF

DF

SF

DF

TDF

D4H TSK

124-8237

124-8240

346-8807

347-0406

347-4170

D5H Custom Skidder

121-0824

121-0827

310-4912

310-4915

310-4918

D5H TSK

129-2977

129-2978

310-4912

310-4915

310-4918

517 TSK

149-1050

149-1051

310-4912

310-4915

310-4918

527 TSK

231-3093

243-5325

356-1212

359-9780

--

 

Mounting Hardware & Torque

Abutment Roller Cap

Bolt

Washer

Bolt size

Bolt Torque

D4H TSK

248-5323

1A-8537

5P-8247

5/8"-11

240 +/- 40 N-m

D5H Custom Skidder

223-9110

1B-4367

5P-8247

5/8"-11

240 +/- 40 N-m

D5H TSK

322-4691

1D-4610

5P-8248

3/4"-10

430 +/- 60 N-m

517 TSK

322-4691

6V-3669

8T-3282

20mm

520 +/- 70 N-m

527 TSK

360-9216

8T-0360

8T-3282

20mm

520 +/- 70 N-m

 

Custom Track Service (CTS)
 
Reference the attached wear charts in the Custom Track Service Handbook. (PEKP9400-07)

 

 

 

Model

 

 

 

Roller Type

 

 

Wear Chart Number

 

 

 

Roller Type

 

 

Wear Chart Number

D4H TSK

Single, Double

5251

Tall Double

6140

D5H Custom Skidder

Single, Double

5291

Tall Double

6181

D5H TSK

Single, Double

5291

Tall Double

6181

517 TSK

Single, Double

5291

Tall Double

6181

527 TSK

Single, Double

5312

N/A

N/A

 

Contact Information:

                        Global Dealer Solutions Network
                       
Parts Technical Support Team
                       
Toll Free - North America:  1-877-228-2420
                       
International: +1-309-266-4421

                       
Electronic Requests:

                        Send via Microsoft Customer Relationship Management (MSCRM)
           
           For access and tutorial information: https://gdsn.cat.com/mscrm

AVS, AVSpare, their respective logos, ?AVSpare Yellow? and the ?Power Edge? trade dress, as well as corporate and product identity used herein, are trademarks of AVSpare and may not be used without permission.

 

The information contained herein is intended for circulation only to AVSpare and dealer employees whose duties require knowledge of such reports and is intended exclusively for their information and training. Any reproduction of this release without the foregoing explanation is prohibited.

 

This IRM can be viewed and downloaded electronically from the Internet. Please refer to your marketing organization specific site for access to the AVSpare Media Information Center which contains all of the active IRMs and product support communication materials.

 

? 2012 AVSpare Inc.  All Rights Reserved

 

 

 
PELJ1772

AVSpare?

?2015 AVSpare

Information System:

CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL C11 AND 3412 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS
Reman Announces C18, C32 and 3500 Engine Options for Electric Power Applications
312B/C/D GENERAL DUTY UNDERCARRIAGE INTRODUCTION
Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat Machine Applications
CAT REMAN ANNOUNCES ADDITIONAL 3412, 3408, 3306, 3406, C7, 3196 AND C18 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
330/336 GENERAL DUTY UNDERCARRIAGE INTRODUCTION
CAT REMAN ANNOUNCES ADDITIONAL SHORT BLOCK OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
IMPROVED SystemOne TRACK CARTRIDGE AVAILABLE ON CERTAIN
CAT REMAN ANNOUNCES ADDITIONAL 3116, 3126, C-9 AND 3176 ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT INDUSTRIAL APPLICATIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
EXPANSION OF REMAN HYDRAULIC PUMPS
CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT MACHINE APPLICATIONS
NEW D5K/K2 SYSTEMONE� RELIEVED TREAD IDLER (RTI)
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
UNDERCARRIAGE RELATED IRM LISTING
NEW TRACK SHOES AVAILABLE FOR 5230 (7LL) EXCAVATOR
GREASE LUBRICATED LINK ASSEMBLIES FOR HYDRAULIC EXCAVATORS
NEW D11R TRACK IDLER GROUP WITH IMPROVED RETAINER BOLT RETENTION
IMPROVED 953B/D5B SPROCKET SEGMENT
EXCAVATOR TRACK ROLLER IMPROVEMENTS
NEW D10R, D9R, D8R, & 583R PIPELAYER TRACK ROLLER GROUPS WITH IMPROVED RETAINER BOLT RETENTION
D6R/D6H NEW AND IMPROVED EQUALIZER BAR ASSEMBLIES FOR SEVERE APPLICATIONS