| Show/hide table
|
||
| Show/hide table
|
||
|
November 2001 |
D11R IMPROVED LINK ASSEMBLY AND TRACK BUSHING
New D11R machines from the factory equipped with improved link assembly containing a specially machined bushing profile on the inner diameter, that will reduce track galling between the track pin and bushing. The improved link assembly and bushing are now available in the parts department.
Adaptability
The new link assembly and bushing can be used on earlier model D11R and D11N machines. The effective serial number on the link assembly is PB218E01. The new link assembly was effective on the following D11R factory built machines.
|
Model |
Serial Number |
|
D11R Carrydozer |
AAF00170 & Up |
|
D11R |
7PZ00509 & Up |
Servicing
The former link assembly and bushing was cancelled and replaced by the new link assembly and bushing. Refer to Service Magazine, dated October 15, 2001 for additional information.
Part Number Information
|
Part Name |
Former |
New |
|
Link Assembly (41 Sections) |
183-9331 |
207-6162 |
|
Bushing |
183-9330 |
202-0908 |
Custom Track Service (CTS)
When performing CTS, refer to D11R/N wear charts found in the 14th Edition of CTS Handbook (Media Number PEPK9400-02).
TCRobertson
Undercarriage Marketing Division
Parts and Service Marketing
CV4111 ? Tel (309) 675-7879
E-mail: Robertson_Thomas@AVS.com
| Show/hide table
|