Digital Output On/Off - Test
`
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
[SENR1935]
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Electronic Governor - Calibrate
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MACHINE
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Swing Is Inoperable - Troubleshoot - 410A
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Automatic Travel Speed Change Is Abnormal - Troubleshoot - 4107, 4204, and 4207
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Controllability Is Bad in Boom Priority Mode - Troubleshoot - 4106
Show/hide table
| Digital Output Test | ||
| Channel No. Display ON/OFF | Output Signal Name | Character |
| 2 | Swing Priority Solenoid | 622 |
| 3 | Boom Raise Solenoid | 623 |
| 4 | Two Speed Travel Solenoid | 624 |
| 5 | Travel Alarm | 625 |
| 6 | Spare Solenoid 1 | 626 |
| 7 | Spare Solenoid 2 | 627 |
| 8 | Oil Tank Pressure Indicator | 628 |
Show/hide table
 | |
| Illustration 1 | g00662996 |
Monitor Panel (22) Travel alarm cancel switch (23) Boom priority mode switch (24) Swing priority mode switch (25) Fine control mode switch | |
This function displays the condition of the digital outputs that are connected to the controller.
- Enter service code 62. The character display shows the number of the channel first. Then, "on" or "off" is displayed.
- The fine control mode switch (25) is depressed in order to shift the blinking position of the character display to the fourth character position from the right.
- When the boom priority mode switch (23) is depressed the channel numbers are displayed in ascending order.
- When the swing priority mode switch (24) is depressed the channel numbers are displayed in descending order.
- The travel alarm cancel switch (22) is pressed in order to change the digital output between "on" and "oF".
Information System:
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Hydraulic Hammer - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Parameter - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Troubleshooting Undiagnosed Problems
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Real Time Error Codes
305 CR Mini Hydraulic Excavator
Cooling System Coolant (ELC) - Change
Horizontal Pin Lock Series PW Quick Coupler
Rated Load
345B Series II Excavator Hydraulic System
Main Control Valve
305.5 Mini Hydraulic Excavator
Bucket Tips - Inspect/Replace
432D and 442D Backhoe Loaders
Equipment Lowering with Engine Stopped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Lubricant Viscosities
305 CR Mini Hydraulic Excavator
Boom and Stick Linkage - Lubricate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Electronic Governor - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Speed Sensor - Replace
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Controller Input and Output Values
325C Excavator Machine System Specifications
Boom - 5550 mm (218.5 inch)
3500B, 776D, 777D, 784C, 785C, 789C, 793C and and 793D Off-Highway Truck/Tractors
Refrigerant Compressor
305 CR Mini Hydraulic Excavator
Engine Air Filter Primary Element - Clean/Replace
325C Excavator Machine System Specifications
Boom - 6150 mm (242.1 inch)
305 CR Mini Hydraulic Excavator
Engine Oil Level - Check
M315 Excavator Hydraulic System
Engine Performance - Test
CS44 and CP44 Soil Compactor Machine System
Vibratory Support