Sensors and Electrical Connectors
`
3456 Engine for Caterpillar Built Machines
[RENR2339]
3456 Engine for Caterpillar Built Machines
E039 Low Engine Oil Pressure Derate
3456 Engine for Caterpillar Built Machines
Ether Injection System - Test
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Show/hide table
Electrical connectors     | |
---|---|
Jack/Plug     | Component     |
J1/P1     | ECM connector     |
J2/P2     | ECM connector     |
J3/P3     | Machine connector     |
J20/P20     | Primary engine speed/timing sensor     |
J21/P21     | Coolant temperature sensor     |
J22/P22     | Engine oil pressure sensor     |
J23/P23     | Turbocharger outlet pressure sensor     |
J26/P26     | Timing calibration (TC) probe connector     |
J27/P27     | Atmospheric pressure sensor     |
J42     | Service tool connector     |
J43/P43     | Fuel temperature sensor     |
J44/P44     | Secondary engine speed/timing sensor     |
J87/P87     | Throttle backup switch     |
J89/P89     | Intake manifold air temperature sensor     |
J91/P91     | MEUI connector     |
J118/P118     | Throttle switch     |
Show/hide table
![]() | |
Illustration 1 | g00724464 |
ECM connector |
Show/hide table
![]() | |
Illustration 2 | g00898045 |
Diagram of components |
Show/hide table
![]() | |
Illustration 3 | g00988128 |
Sensor locations |
Information System:
312C and 312C L Excavator
VA Boom Controls
345B Series II Excavator Hydraulic System
SmartBoom Hydraulic System
3456 Engine for Caterpillar Built Machines
E039 Low Engine Oil Pressure Derate
312C and 312C L Excavator
Specifications
325C Excavator Machine System Specifications
Bucket
Quick Coupler Wedge Lock(Wheel Loader)
Operating Technique Information
315C Excavator
Window (Front)
3456 Engine for Caterpillar Built Machines
System Configuration Parameters
5130B Excavator
Lifting the Boom
312C and 312C L Excavator
Lifting Capacities - 312C with a VA Boom
312C and 312C L Excavator
Air Inlet Heater Starting Aid
325C Excavator Machine System Specifications
Bucket
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System
Control Valve (Boom) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System
Control Valve (Stick) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System
Control Valve (Swing) (Mechanically Operated)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System
Control Valve (Stick) (Pilot Operated)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System
Control Valve (Swing) (Pilot Operated)
305 CR Mini Hydraulic Excavator
Joystick Controls Alternate Patterns
2001/10/01
Correction to Special Instruction , "Rebuilding the Backhoe Loader Pin Bores" {6101, 6104, 6119, 6501, 6502, 6503, 6506, 6508, 6515, 6518, 6533, 7054, 7222}
365B, 365B Series II and 365BL Excavators
Radiator Core - Clean
3046 Engine for Caterpillar Built Machines
Engine Oil Cooler - Inspect
312C Excavator Machine Systems
Tank and Filter (Hydraulic) - Install
Quick Coupler Wedge Lock(Wheel Loader)
Approved Machines
BH27, BH30 and BH30 W Skid Steer Loader Backhoes
Stick Cylinder - Remove and Install