416E, 420E and 430E Backhoe Loaders Using Advisor to Determine Diagnostic Codes Caterpillar


Using Advisor to Determine Diagnostic Codes
`
416E, 420E and 430E Backhoe Loaders [UENR0237]
OPERATOR STATION
PANEL GP
416E, 420E and 430E Backhoe Loaders Using Advisor to Determine Diagnostic Codes



Illustration 1g01222645

Typcial Advisor screen for "Events"




Illustration 2g01222646

Typical Advisor screen for "Event Summary"




Illustration 3g01222647

Typical Advisor screen for "Event Detail"

From the Service Menu, use the appropriate "ARROW" button to highlight the "Events" option, then press the "OK" button in order to access the Diagnostics screen. The Diagnostics screen shows a complete list of all active and logged diagnostic codes. Each line on the list shows the MID, CID, and FMI. Also the display shows the number of occurrences, the time (service hour) of the first occurrence and the last occurrence of the code or event, and whether it is currently active. From the Diagnostics screen, use the appropriate" ARROW" button to highlight a specific code (line on the list), then press the "OK" button to display that line's "Event Detail". The Detailed View will display a text message showing the reporting ECM (MID), identify the failed component (CID), and provide an explanation of the failure, such as "Erratic, Intermittent, or Incorrect" (FMI).

Note: The codes and events that are displayed in the Diagnostics option may be viewed at any time, but logged codes cannot be cleared until the technician has successfully entered the four digit machine password. Refer to Service Manual, RENR6489 for additional information.

Information System:

416E, 420E and 430E Backhoe Loaders Using Caterpillar Electronic Technician to Determine Diagnostic Codes
416E, 420E and 430E Backhoe Loaders Transmission - Standard Shift
416E, 420E and 430E Backhoe Loaders Visual Inspection
416E, 420E and 430E Backhoe Loaders Switch Circuits
416E, 420E and 430E Backhoe Loaders Steering System
416E, 420E and 430E Backhoe Loaders Service Tools
416E, 420E and 430E Backhoe Loaders Power Supply Circuit of Electronic Control Module
416E, 420E and 430E Backhoe Loaders Operational Checks (Transmission)
416E, 420E and 430E Backhoe Loaders Operational Checks (Steering System)
416E, 420E and 430E Backhoe Loaders Operational Checks (Brake System)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications Boom Cylinder
C6.6 Industrial Engine Power Sources
416E, 420E and 430E Backhoe Loaders System Schematic
328D CR Excavator Boom/Stick/Bucket Combinations
2010/07/08 The Configuration of the 320D Engine Arrangement Has Been Updated for the Fan Drive System {1359}
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Check Valve (Cooler Bypass) - Remove and Install
2010/04/29 An Improved Cylinder for the Log Fork Is Available for the 988G and the 988H Wheel Loader {5807, 6114}
374D Excavator Hydraulic System Pump Control (Main Hydraulic)
374D Excavator Hydraulic System Main Control Valve - Limiting Circuit Pressure
374D Excavator Hydraulic System Main Control Valve
374D Excavator Hydraulic System Main Control Valve - Load Signal Regulation
330D and 336D Excavators and 330D Material Handlers Machine System Specifications Bucket Cylinder
390D Excavator Hydraulic System Proportional Priority Pressure Compensation System
374D Excavator Hydraulic System Load Check Valve and Flow Compensator Valve