Connectors for the Electronic Control Module (ECM)
 | |
| Illustration 1 | g02153917 |
Locations of the components at the ECM (1) P2 ECM connector (ECM side) (2) P1 ECM connector (ECM side) (3) P2 ECM connector (harness side) (4) P1 ECM connector (harness side) (5) ECM | |
Injector Connectors
Connectors at the Valve Cover
 | |
| Illustration 2 | g02153916 |
Connector at the Injector
 | |
| Illustration 3 | g02155319 |
 | |
| Illustration 4 | g01717773 |
Typical injector | |
Sensor Connectors
Analog Sensor Connector (active)
 | |
| Illustration 5 | g01240891 |
Analog Sensor Connector (passive)
 | |
| Illustration 6 | g01241538 |
Connectors for the Termination Resistor
 | |
| Illustration 7 | g01355248 |
Engine Speed/Timing Connector
 | |
| Illustration 8 | g01155187 |
Ampseal Connector (typical)
 | |
| Illustration 9 | g02219254 |
Refer to Special Instruction, REHS2556, "AMPSEAL 16 Connector System" for additional information | |
Deutsche Connectors (typical)
 | |
| Illustration 10 | g02220494 |
Refer to Tool Operating Manual, SEHS9615, "Servicing Deutsch HD and DT Style Connectors" for additional information | |