Window Wiper Motor - Remove and Install - Upper
`
320D2 GC Excavator Machine Systems
[M0066452]
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Connect
320D2 GC Excavator Machine Systems
Cab - Remove and Install
OPERATOR STATION
WIPER GP-WINDOW
320D2 GC Excavator Machine Systems
Window Wiper Motor - Remove and Install - Upper
1.1. Removal Procedure
2.1. Installation Procedure
Note: The wiper motor must be in the OFF position.
- Remove cover (1). Remove bolt (2) and cup (3).
Show/hide table
Illustration 2 g01207838 - Remove screw (4) and bolt (5). Reposition cover (6) to the side.
Show/hide table
Illustration 3 g01207842 - Remove bolts (7) and cover assembly (8).
Show/hide table
Illustration 4 g01207848 - Remove rod (9). Reposition floor mat (10) to the side.
Show/hide table
Illustration 5 g01207860 - Remove bolts (12) and cover (11).
Show/hide table
Illustration 6 g01207861 - Remove linkage (15). Remove nuts (13) and bolts (14). Disconnect harness assembly (17). Remove windshield wiper motor (16).
Show/hide table
| |
| Illustration 1 | g01207837 |
- Position windshield wiper motor (16). Connect harness assembly (17). Install nuts (13) and bolts (14). Install linkage (15) so that the ball joint for rod (9) (not shown) is straight above the nut.
Show/hide table
Illustration 8 g01207860 - Position cover (11) and install bolts (12).
Show/hide table
Illustration 9 g01207848 - Install rod (9). Position floor mat (10).
Show/hide table
Illustration 10 g01207842 - Position cover assembly (8) and install bolts (7).
Show/hide table
Illustration 11 g01207838 - Position cover (6) to the side. Install screw (4) and bolt (5).
Show/hide table
Illustration 12 g01207837 - Install cup (3) and bolt (2). Install cover (1).
Note: The wiper motor must be in the OFF position.
Show/hide table
| |
| Illustration 7 | g01207861 |
Information System:
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Connect
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Piston and Connecting Rods - Remove and Install
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Separate
312F and 313F Excavator Machine Systems
Cylinder Speed - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Boom Bearings and Seals - Remove and Install
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Blade (If Equipped)
312F and 313F Excavator Machine Systems
Electronic Control (Travel System)
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Declaration of Conformity
312F and 313F Excavator Machine System Specifications
Boom - 4.65 m (15.256 ft)
320D2 GC Excavator Machine Systems
Boom - Remove and Install
Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Safety Messages
320D2 GC Excavator Machine Systems
Cab - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
325F Excavator Engine Supplement
Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Assemble
An Improved Double Grouser Track Shoe is Now Used On Certain Excavators {4170}
300.9D VPS Mini Hydraulic Excavator Machine Systems
Fuel Injection Nozzle - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
320D2 GC Excavator Machine Systems
Counterweight - Remove and Install
320D2 GC Excavator Machine Systems
Fuel Tank - Remove and Install
325F Excavator Machine Systems
Counterweight - Remove and Install