Camshaft Gear - Remove and Install
`
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
[UENR7319]
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Piston and Connecting Rods - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
BASIC ENGINE
CAMSHAFT GP
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Camshaft - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Group | 1 |
| B | 8B-7551 | Puller Assembly | 1 |
Start By:
- Remove the camshaft.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
- Use Tooling (A) to remove camshaft gear (1) from camshaft (2). Use Tooling (B) to install camshaft gear (1) onto camshaft (2).
Show/hide table
Illustration 2 g02721212 - Remove plate (3) from camshaft (2).
- If necessary, remove the key from the nose of the camshaft.
Show/hide table
| |
| Illustration 1 | g02721209 |
- Install camshaft gear (1) in the reverse order of removal.
- Ensure that the camshaft gear and the key are clean and free from wear and damage.
Information System:
320D2 GC Excavator Machine Systems
Cab - Remove and Install
320D2 GC Excavator Machine Systems
Window Wiper Motor - Remove and Install - Upper
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Connect
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Piston and Connecting Rods - Remove and Install
320D2 GC Excavator Machine Systems
Upper Frame and Undercarriage Frame - Separate
312F and 313F Excavator Machine Systems
Cylinder Speed - Check - Blade (If Equipped)
320D2 GC Excavator Machine Systems
Boom Bearings and Seals - Remove and Install
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Blade (If Equipped)
312F and 313F Excavator Machine Systems
Electronic Control (Travel System)
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Declaration of Conformity
312F and 313F Excavator Machine System Specifications
Boom - 4.65 m (15.256 ft)
320D2 GC Excavator Machine Systems
Boom - Remove and Install
325F Excavator Engine Supplement
Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Assemble
An Improved Double Grouser Track Shoe is Now Used On Certain Excavators {4170}
300.9D VPS Mini Hydraulic Excavator Machine Systems
Fuel Injection Nozzle - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
320D2 GC Excavator Machine Systems
Counterweight - Remove and Install
320D2 GC Excavator Machine Systems
Fuel Tank - Remove and Install
325F Excavator Machine Systems
Counterweight - Remove and Install
312F and 313F Excavator Machine System Specifications
Hydraulic Tank and Filter
312F and 313F Excavator Machine System Specifications
Air Conditioner Lines