415F2 Industrial Loader Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt Caterpillar


Bucket Positioner Control - Remove and Install - Single Tilt
`
415F2 Industrial Loader Machine Systems [M0067024]
HYDRAULIC SYSTEM
KICKOUT & POSITIONER GP
415F2 Industrial Loader Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g02848499

  1. Remove pin (1) and yoke assembly (2).


    Illustration 2g02848503

  2. Remove bolts (3) and tube assembly (4).


    Illustration 3g01523982


    Illustration 4g01523987

  3. Remove bolts (6) and reposition bracket assembly (5) (not shown).

  4. Loosen nut (9). Disconnect harness assemblies (7) from roller switch assembly (8). Remove roller switch assembly (8) from bracket assembly (5).

Installation Procedure

  1. Install the bucket positioner control in the reverse order of removal.

    1. Tighten nut (9) to a torque of 18.5 ± 5.0 N·m (164 ± 44 lb in).

  2. Adjust the bucket positioner control. Refer to Specifications, "Bucket Positioner and Lift Kickout".

Information System:

349F XE and 352F XE Excavators Boom Hydraulic System - Health Check
New Software Is Now Available for all Cat Object Detection and Vision Applications On Certain Cat Products {7610, 7620}
415F2 Industrial Loader Machine Systems Bucket - Remove and Install
Improved Travel Motor Plugs and New Torque Specifications are Now Used on Forest Machines and Track Feller Bunchers {0663, 5058}
320D2 GC Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
320D2 GC Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
320D2 GC Excavator Machine Systems Main Control Valve - Assemble
320D2 GC Excavator Machine Systems Main Control Valve - Disassemble
320D2 GC Excavator Machine Systems Main Control Valve - Remove and Install
320D2 GC Excavator Machine Systems Pressure Reducing Valve - Assemble
320D2 GC Excavator Machine Systems Pressure Reducing Valve - Disassemble
320D2 GC Excavator Machine Systems Pressure Reducing Valve - Remove and Install
415F2 Industrial Loader Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Lift Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Lift Arms - Remove and Install - Single Tilt
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install
320D2 GC Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Remove