415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install Caterpillar


Piston Pump (Main Hydraulic) - Remove and Install
`
415F2 Industrial Loader Machine Systems [M0067024]
HYDRAULIC SYSTEM
PUMP GP
415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the rear drive shaft if needed.

  1. Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.


    Illustration 1g02895037

  2. Remove plate (1). Remove floor mat (2).


    Illustration 2g06034298


    Illustration 3g06034314

  3. Raise panel (4) and disconnect harness (5), remove panel (4). Remove cover (3).


    Illustration 4g06034362

  4. Remove hose assemblies (6), (7), (10) and (11). Remove bolts (9) and piston pump (8). Use two people to remove piston pump (8). The weight of piston pump (8) is approximately 26 kg (58 lb).

Installation Procedure

  1. Install piston pump (8) in the reverse order of removal.

Information System:

307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
415F2 Industrial Loader Machine Systems Lift Arms - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Lift Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt
349F XE and 352F XE Excavators Boom Hydraulic System - Health Check
New Software Is Now Available for all Cat Object Detection and Vision Applications On Certain Cat Products {7610, 7620}
415F2 Industrial Loader Machine Systems Bucket - Remove and Install
Improved Travel Motor Plugs and New Torque Specifications are Now Used on Forest Machines and Track Feller Bunchers {0663, 5058}
320D2 GC Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
320D2 GC Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
320D2 GC Excavator Machine Systems Main Control Valve - Assemble
415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install
320D2 GC Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
C9.3 Tier 4 Final Engines Cylinder Head Valves
816K Landfill Compactor Transmission Magnetic Screen - Clean
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install