415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install Caterpillar


Hydraulic Tank - Remove and Install
`
415F2 Industrial Loader Machine Systems [M0067024]
BRAKING SYSTEM
TANK GP
415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the cab (if equipped).

  2. Remove the canopy (if equipped).

  1. Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.


    Illustration 1g03235269

  2. Disconnect hoses (2) from hydraulic tank assembly (1).

  3. Disconnect clamp (3) and hose (4).


    Illustration 2g03235697

  4. Disconnect clamp (5).


    Illustration 3g03235656

  5. Remove bolts (6) and hydraulic tank assembly (1).


    Illustration 4g03235920

  6. Remove strainer (7) and gauge (8) from hydraulic tank assembly (1).

  7. Remove bolts (9) and bracket assembly (10) from hydraulic tank assembly (1).

Installation Procedure

  1. Install hydraulic tank assembly (1) in the reverse order of removal.

    1. Tighten bolts (9) to a torque of 50 ± 5 N·m (37 ± 3 lb ft).

    2. Tighten strainer (7) to a torque of 50 ± 5 N·m (37 ± 3 lb ft).

    3. Tighten gauge (8) to a torque of 8 ± 1 N·m (71 ± 9 lb in).

    4. Tighten bolts (6) to a torque of 35 ± 5 N·m (26 ± 4 lb ft).

Information System:

415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
415F2 Industrial Loader Machine Systems Lift Arms - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Lift Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt
349F XE and 352F XE Excavators Boom Hydraulic System - Health Check
New Software Is Now Available for all Cat Object Detection and Vision Applications On Certain Cat Products {7610, 7620}
415F2 Industrial Loader Machine Systems Bucket - Remove and Install
Improved Travel Motor Plugs and New Torque Specifications are Now Used on Forest Machines and Track Feller Bunchers {0663, 5058}
320D2 GC Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
320D2 GC Excavator Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
320D2 GC Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
C9.3 Tier 4 Final Engines Cylinder Head Valves
816K Landfill Compactor Transmission Magnetic Screen - Clean
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}