415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install Caterpillar


Steering Metering Pump - Remove and Install
`
415F2 Industrial Loader Machine Systems [M0067024]
STEERING SYSTEM
PUMP GP-METERING
415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove steering wheel.

  1. Release the system pressure.


    Illustration 1g01119509

  2. Remove bolts (3) and plate (2). Remove floor mat (1).


    Illustration 2g03803516

  3. Remove pins (4) and cover (5).


    Illustration 3g03803564


    Illustration 4g03803578

  4. Remove cover (6). Disconnect harness assemblies (7). Remove cover (8).


    Illustration 5g06081025


    Illustration 6g03803610

  5. Remove cover (9). Unsnap lower panel (10) loose from the upper panel at Location (X). Remove lower panel (10).


    Illustration 7g03804118

  6. Remove bolts (11) and steering column (12).


    Illustration 8g03804216

  7. Disconnect hose assemblies (15) and (16). Remove bolt (13) and steering metering pump (14).

Installation Procedure

  1. Install steering metering pump (14) in the reverse order of removal.

Information System:

320D2 GC Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install
415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
415F2 Industrial Loader Machine Systems Lift Arms - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Lift Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt
349F XE and 352F XE Excavators Boom Hydraulic System - Health Check
New Software Is Now Available for all Cat Object Detection and Vision Applications On Certain Cat Products {7610, 7620}
415F2 Industrial Loader Machine Systems Bucket - Remove and Install
Improved Travel Motor Plugs and New Torque Specifications are Now Used on Forest Machines and Track Feller Bunchers {0663, 5058}
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
C9.3 Tier 4 Final Engines Cylinder Head Valves
816K Landfill Compactor Transmission Magnetic Screen - Clean
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}