415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install Caterpillar


Steering Wheel - Remove and Install
`
415F2 Industrial Loader Machine Systems [M0067024]
OPERATOR STATION
CONTROL GP-STEERING
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
8S-2264  Puller Gp 


    Illustration 1g03803985


    Illustration 2g03803993

  1. Remove cover (1).

  2. Remove nut (2).


    Illustration 3g03804014

  3. Use Tooling (A) to remove steering wheel (3).

Installation Procedure

  1. Install steering wheel (3) in the reverse order of removal.

Information System:

415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
320D2 GC Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install
415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
415F2 Industrial Loader Machine Systems Lift Arms - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Lift Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Tilt Cylinder - Remove and Install - Single Tilt
415F2 Industrial Loader Machine Systems Bucket Positioner Control - Remove and Install - Single Tilt
349F XE and 352F XE Excavators Boom Hydraulic System - Health Check
New Software Is Now Available for all Cat Object Detection and Vision Applications On Certain Cat Products {7610, 7620}
415F2 Industrial Loader Machine Systems Bucket - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
C9.3 Tier 4 Final Engines Cylinder Head Valves
816K Landfill Compactor Transmission Magnetic Screen - Clean
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}
320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install