GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install Caterpillar


Head Assembly and Bushing - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g06022412

  1. Attach a suitable lifting device to head assembly (1). The weight of head assembly (1) is approximately 45 kg (99 lb).

  2. Remove bolts (2) and head assembly (1).


    Illustration 2g06022416

  3. Remove lip seal (4) and bearing (3). Repeat for the other side.

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-0520  Driver Gp 
Loctite 243 


    Illustration 3g06022416


    Illustration 4g06022420
    (X) 6.0 ± 1.0 mm (0.24 ± 0.04 inch)

  1. Use Tooling (A) and a suitable press to install bearing (3) and lip seal (4). Install bearing (3) to Dimension (X). Install lip seal (4). Repeat for the other side.


    Illustration 5g06022412

  2. Use a suitable lifting device to install head assembly (1). The weight of head assembly (1) is approximately 45 kg (99 lb). Install head assembly (1).

  3. Apply Tooling (B) to the threads of bolts (2). Install bolts (2). Tighten bolts (2) to a torque of 520 ± 70 N·m (384 ± 52 lb ft).

Information System:

816K Landfill Compactor Transmission Magnetic Screen - Clean
C9.3 Tier 4 Final Engines Cylinder Head Valves
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
415F2 Industrial Loader Machine Systems Steering Metering Pump - Remove and Install
320D2 GC Excavator Engine Supplement Engine - Remove and Install
415F2 Industrial Loader Machine Systems Hydraulic Tank - Remove and Install
415F2 Industrial Loader Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}
320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
320D2 GC Excavator Engine Supplement Radiator - Remove and Install
Replacement Procedure for the Return Hose Assemblies on Certain 308E2 Excavators {5057, 5068}
320D2 GC Excavator Engine Supplement Hydraulic Oil Cooler - Remove and Install
415F2 Industrial Loader Machine Systems Air Conditioner and Heater - Remove and Install
415F2 Industrial Loader Machine Systems Fuel Tank - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Refueling Pump - Remove and Install
Installing the <NOBR>387-6451</NOBR> Ride Control Kit to a Machine That Has an ECM {5004}
Installing the <NOBR>387-6450</NOBR> Ride Control Kit to a Machine That Does Not Have an ECM {5004}