320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install Caterpillar


Radiator and Hydraulic Oil Cooler - Remove and Install
`
320D2 GC Excavator Engine Supplement [M0066450]
COOLING SYSTEM
RADIATOR GP
320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
320D2 GC Excavator Engine Supplement Radiator - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
433-2736  Lift Link 

Start By:

  1. Remove the hood.

  2. Remove the fan.

  3. Remove the aftercooler.

  4. Remove the condenser.

  1. Drain the hydraulic oil.

  2. Drain the coolant.


    Illustration 1g06022185

  3. Disconnect tube assemblies (1) and (2). Remove hose assemblies (3), (4), and (5).


    Illustration 2g06022192

  4. Remove bolts (6). Remove panel (7).


    Illustration 3g06022200

  5. Remove hose assemblies (8) and (9).


    Illustration 4g06022206

    Note: Components removed for photographic purposes.

  6. Remove bolts (10). Remove bracket (11).


    Illustration 5g06022208

  7. Remove bolts (12).


    Illustration 6g06022212

  8. Remove hose assembly (13).


    Illustration 7g06022216

    Note: Components removed for photographic purposes.

  9. Attach Tooling (A) and a suitable lifting device to radiator and hydraulic oil cooler (14). The radiator and hydraulic oil cooler weights approximately 129 kg (285 lb).


    Illustration 8g06022222

  10. Remove bolts (15). Remove radiator and hydraulic oil cooler (14).

Installation Procedure

  1. Install radiator and hydraulic oil cooler (14) in the reverse order of removal.

Information System:

An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
816K Landfill Compactor Transmission Magnetic Screen - Clean
C9.3 Tier 4 Final Engines Cylinder Head Valves
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
415F2 Industrial Loader Machine Systems Steering Wheel - Remove and Install
320D2 GC Excavator Engine Supplement Radiator - Remove and Install
Replacement Procedure for the Return Hose Assemblies on Certain 308E2 Excavators {5057, 5068}
320D2 GC Excavator Engine Supplement Hydraulic Oil Cooler - Remove and Install
415F2 Industrial Loader Machine Systems Air Conditioner and Heater - Remove and Install
415F2 Industrial Loader Machine Systems Fuel Tank - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Refueling Pump - Remove and Install
Installing the <NOBR>387-6451</NOBR> Ride Control Kit to a Machine That Has an ECM {5004}
Installing the <NOBR>387-6450</NOBR> Ride Control Kit to a Machine That Does Not Have an ECM {5004}
C9.3 Tier 4 Final Engines Fuel Injection Pump
C9.3 Tier 4 Final Engines Cylinder Head
GSV520 and GSV525 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
New Fuel Injection Pump Stop Solenoid is Available on Certain 3054C and C7.1 (Mech) Machine Engines {1251, 1259, 1264}