320D2 GC Excavator Engine Supplement Radiator - Remove and Install Caterpillar


Radiator - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the radiator and the hydraulic oil cooler.


    Illustration 1g06022262


    Illustration 2g06022270

  1. Remove bolts (1) and shroud (2).

  2. Remove hose assembly (3). Remove bolts (4). Remove plate (5).


    Illustration 3g06022281


    Illustration 4g06022276

  3. Remove bolts (6).


    Illustration 5g03243597

  4. Remove radiator (7).

Installation Procedure

  1. Install radiator (7) in the reverse order of removal.

Information System:

320D2 GC Excavator Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
An Improved Air Conditioning Compressor Is Used On Certain Wheeled Excavators {1152, 1802}
Improved Software is Available to Re-Flash the Monitor Software for Certain 307E2 Tier 4 Final Mini Hydraulic Excavators {7490, 7601, 7603, 7610, 7620}
An Improved Routing is Now Used for the Pilot Hose on Certain 336D2 and 340D2 Excavators {5057, 5059}
GSV520 and GSV525 Orange Peel Grapples Head Assembly and Bushing - Remove and Install
816K Landfill Compactor Transmission Magnetic Screen - Clean
C9.3 Tier 4 Final Engines Cylinder Head Valves
415F2 Industrial Loader Machine Systems Refrigerant Accumulator - Remove and Install
415F2 Industrial Loader Machine Systems Cab - Install
415F2 Industrial Loader Machine Systems Cab - Remove
415F2 Industrial Loader Machine Systems Canopy - Remove and Install
415F2 Industrial Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
Replacement Procedure for the Return Hose Assemblies on Certain 308E2 Excavators {5057, 5068}
320D2 GC Excavator Engine Supplement Hydraulic Oil Cooler - Remove and Install
415F2 Industrial Loader Machine Systems Air Conditioner and Heater - Remove and Install
415F2 Industrial Loader Machine Systems Fuel Tank - Remove and Install
307E2 Mini Hydraulic Excavator Machine Systems Refueling Pump - Remove and Install
Installing the <NOBR>387-6451</NOBR> Ride Control Kit to a Machine That Has an ECM {5004}
Installing the <NOBR>387-6450</NOBR> Ride Control Kit to a Machine That Does Not Have an ECM {5004}
C9.3 Tier 4 Final Engines Fuel Injection Pump
C9.3 Tier 4 Final Engines Cylinder Head
GSV520 and GSV525 Orange Peel Grapples Rotator Motor and Manifold - Remove and Install
New Fuel Injection Pump Stop Solenoid is Available on Certain 3054C and C7.1 (Mech) Machine Engines {1251, 1259, 1264}
GSV520 and GSV525 Orange Peel Grapples Rotator Motor and Manifold - Disassemble